Podcasting since 2005! Listen to Latest SolderSmoke

Saturday, October 30, 2010

Back on the air with QRSS QRPp

I dusted off the old G0UPL QRSS QRPP FSK 30 meter transmitter (built and last used in Italy) and hooked it up to about 50 feet of AC line cord stretched low across the new Northern Virginia backyard. I hooked it up to my Kempton Park power supply (thanks for the chip Tony!) and fired up my freq counter (also from Kempton Park -- remember the chip I soldered in backwards?) I put a field strength meter next to the wire and tuned my L network for max smoke. Hey, and it worked! My signal is the wavy shark fin-looking thing. I think the wave results from a temp drop in the shack that happened when I opened the door. Just to confirm it was me, I turned the transmitter off for a few minutes. You can see me disappear from W1BW's screen.

Its good to be once again emitting EM waves!

Friday, October 29, 2010

Happy Halloween! 20% off SolderSmoke

I hope to have a new podcast out soon, perhaps a Halloween edition. Lulu is offering 20% off on SolderSmoke -- The Book. Just use the coupon code: TRICK305

Monday, October 18, 2010

Linux makes you younger! "Aha! moments"

Listeners seem to like the audio quality of SolderSmoke episode #126. I was surprised by this because I didn't do any of the post-recording processing that I'd done in earlier episodes. I didn't even have the foam "Popping P Protector" on the mic. And the equalizer that Brent sent hasn't been put in service yet. The improved audio may simply be the result of broader bandwidth -- I didn't use the Audacity equalizer to drop off the lows and highs. Perhaps that explains why the file was over 40 MB instead of the normal 20 MB. Several listeners said that I sounded 10 years younger in 126 -- it must be a Linux thing.

Chris KJ4GUU posted a nice comment about my book "SolderSmoke -- Global Adventures in Wireless Electronics" (which he calls SSGAWE):

"I have started reading I have started reading SSGAWE again. Whenever I have a question about a project I can usually find help in your book, its becoming more of a cherished reference guide that has produced more Ah-ha! moments than any other book I own. Thanks again!"

Thanks Chris -- those "Ah-ha! moments" were what I was hoping to produce.

For more info on the book, go here:
http://soldersmoke.com/book.htm

Wednesday, October 13, 2010

RSS, Time Signal, Miners...

I was very pleased to send SolderSmoke 126 out yesterday. There are some bugs to be worked out. The audio -- as always -- could use some improvement. (Any comments on how the audio in 126 compares with the 120-125?)

I tried to update the RSS feed this morning -- please let me know if it works properly.

Several listeners have already identified the time Spanish language time signal I've been hearing on 75 meters: HD2IOA in Guayaquil, Ecuador.

Great to see the Chilean miners coming up out of the mine this morning!

Tuesday, October 12, 2010

SolderSmoke IS BACK: #126

October 11, 2010
SolderSmoke returns!
Shack #7: The New Shack
Drake 2-B inhaling RF
Listening to 75 AM and SSB: WA1HLR, KM1A
Time signal on 3820 +/-?
Repairing DaVinci Code QRSS rig
UK test gear works fine on this side of pond!
Computer woes: First Linux SolderSmoke
Astronomy from inside the Beltway
Winter SPRAT: Great info, philosophy, inspiration
Charging up solar cells
Inbound Boatanchors: DX-40, DX-60, HQ-100, HA-600(A), HT-37
MAILBAG
-

Saturday, October 9, 2010

Update, Columbus Day


OK, the Drake 2-B is running. I'm listening to 75 meter SSB. Coffee is on. Solder has been melted in the new shack -- I had to replace the MPF-102 in my little DaVinci Code beacon MEPT 30 meter transmitter. Little by little, SolderSmoke HQ is coming back together, this time in Northern Virginia.

Lulu reports a big holiday weekend sale: 14.92 percent off this weekend only. Just put the EXPLORE305 code in when checking out.
http://www.soldersmoke.com/book.htm

Monday, September 27, 2010

SolderSmokeStatus

I've been getting some increasingly desperate messages about SolderSmoke withdrawal symptoms so I thought I'd better send out a status report. Also, one listener wrote in addressing me as "The Grand Poobah of the SolderSmoke Brotherhood." Wow, with a title like that, I better get going with the podcasts!

Most of the stuff is in the shack. The workbench is assembled. I'm trying to set up for both 220 and 110 (lots of Euro gear accumulated over the last ten years!) Surprisingly, Home Depot doesn't sell 110 to 220 transformers. And I live in an area where LOTS of people move back and forth across the pond. I may have to press my old autotransformer into service.

Most of my really old gear -- the stuff that went into storage over the last decade -- should show up in a week or so. This means my HT-37, DX-40, DX-60, Lafayette HA-600 etc. will be reappearing on the scene.

I hope to get some beacons (uh, I mean MEPTs!) on the air soon.

Unfortunately my ancient computer gave up the ghost during the trip. Hard drive is making scary noises. This will slow down the podcast as I have trouble putting it together with Linux only (which is what I'm operating with now -- thanks Jorge! Without your help I'd be completely off the net) Anyone have any version of Windows I could legally use?

But the Drake 2-B is doing fine. I'm listening to 75 SSB as I type.

Hang in there loyal listeners. Perhaps some of that nicotine gum would help. Or, better, some REAL solder smoke.

73 from the GP

Bill
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column