Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label satellites. Show all posts
Showing posts with label satellites. Show all posts

Thursday, November 30, 2023

AA9IL's Sputnik Tube, Altoids Tin Transmitter

November 24, 2023
Hello Bill
I have just built an tested a 20 meter “Sputnik” transmitter. It uses two Soviet era “rod” tubes and is fixed tuned to 14.060 MHz.  I was able to compress the design to fit in an Altoids tin. The plate tuning capacitor was replaced with a fixed capacitor value closest to the variable for peak power out. Plate voltage is 90 volts and I key both the oscillator and PA via the B+ line. Power output is around 200mW and my first test transmission from the Chicago area was picked up 864 miles away on the east coast via the Reverse Beacon Network. It was definitely Joy of Oscillation and Joy of Transmission!

73, Mike
AA9IL
EN52
----------------

Mike's rig has been heard by many Reverse Beacon Network stations: 


------------------
November 29, 2023
Bill: 
I started a QSO with AC2C in Ellicott, MD who responded to my CQ but the band dropped (20m)
But that’s a good start and I’ll keep at it!  So, yay!
73 Mike
-------------------

Here are some earlier blog post on rigs using Soviet rod tubes: 

Wednesday, July 5, 2023

Quetzal-1 -- The Guatemalan CubeSat

 

Wow, here's another piece of tech news from a place in which I have some experience.  Yesterday I posted about the Telekino developed and tested in Bilbao early in the 20th century -- today's post is about a much more recent effort in Guatemala: this one  to launch a small satellite, a CubeSat. 


Hack-A-Day reports that the Guatemalan University recently open-sourced all their data on the satellite: https://hackaday.com/2023/07/04/quetzal-1-satellite-goes-open-source/   The Hack-A-Day comments are, as usual, harsh and critical, filled with the assumption that the commenters could have done better.  

But hey, three cheers for Quetzal 1 and the Guatemalan satellite builders!  

Wednesday, May 24, 2023

Farhan Speaks to Students about Satellites and Direct Conversion Homebrew Receivers (audio)


In our talks at the local high school we have frequently mentioned Ashhar Farhan, his Cubesat experience, and his use of a direct conversion receivers teach electronics to students in Hyderabad, India.  So we were really please to have the opportunity to bring Farhan himself in to speak to the students we have been working with.  

Here is the audio of Farhan's talk: 

http://soldersmoke.com/FarhanTJ.mp3

The acoustics in the room are not great, so you may have to listen carefully, but it is worth it.  Farhan dispenses a lot of tribal knowledge and wisdom about satellites and about the value of homebrewing simple radio equipment. 

Tuesday, October 11, 2022

SolderSmoke FOREVER! Archived in the WayBack Machine

 
There were recently some stories about an effort to put on the Internet Archive recordings and other material from the history of ham radio.  I am pleased to report that the SolderSmoke podcasts have been included in the new collection: 


They also archived the recordings of my contacts with the MIR space station (and other spacecraft) from the Dominican Republic in the mid 1990s: 


I have also suggested that they find a way to archive all of Jean Shepherd's recordings about ham radio. 

Thanks to Kay K6KJN for putting our material into the archive. 

Thursday, September 15, 2022

SolderSmoke (Old Smoke) Podcast #103 -- March 15, 2009 -- From Rome -- QRSS, Knights and Wizards, LTSpice, and an Echolink QSO with Jeff KO7M (the guy with the Piper Cub)

 15 March 2009 

Beware the Ides of March! 
Ostia Beach and Ostia Antica
248 Knights of QRSS. And Wizards! 
ET Phones Home (with QRSS?) 
Possible new grabbers in VK6 and Dubai
Telescope, Satellites... 
REAL QRP QSOs on 80 and 40
Saving an old Toshiba Laptop
ECHO-QSO WITH JEFF, KO7M: 
-- Piper Cubs and MFJ Cubs
-- Satellite QSOs 
-- LT Spice and test gear
MAILBAG: 
Gene W3PM listens from QE2, HB WSPR rig
Jim AL7V sending parts for my W3PM rig
Jim AB3CV's color burst Gnat
Jason NT7S on Tektronix guys and SolderSmoke
Kevin ZL3KE on old computers
Paul M1CNK's DDS 30-based QRSS beacon
Soeren OZ2DAK on exercise bikes to power beacons

Wednesday, July 27, 2022

IGY! Science and the Vanguard Satellite in 1959 (video)


The International Geophysical Year (1958-1959) was a very scientifically productive period.  It is really amazing how much we learned from tiny satellites like Vanguard.  Like the shape of the Earth!  Great stuff in this video.  

Very cool telescopes and cameras set up around the world to monitor the early satellites.  And there is a quick mention of ham radio efforts to monitor the new spacecraft. 

Thanks to Josh G3MOT for sending this to us. 

Go IGY! 

Sunday, July 24, 2022

A Surprisingly Good Movie from the Late 1960s: "The Ham's Wide World" (Video)


I found this movie to be surprisingly good.  Narrated by Arthur Godfrey, it features Barry Goldwater, and a lot of other hams.  There is a homebrewer too!  Lots of  old rigs we know and love:  a Drake 2-B, a couple of Galaxy Vs, a Benton Harbor lunchbox, Heathkit SB-series rigs, many Swans, and was that an HQ-170 that I saw in there?  There are also many cool antennas, including a 15 meter quad set up by a bunch of Southern California teenagers. 

Near the end, when they visit ARRL Headquarters, we briefly see none-other-than Doug DeMaw, W1FB!  FB!  

Please take a look at this video and post comments about the rigs, antennas, and radio amateurs that you see in the film. 

Monday, June 27, 2022

Thoughts on Homebrew, Makers, DIY, and Hams -- from Lex PH2LB

Sometimes we get a comment that is so good that we elevate it to the main blog page.  That was the case with Lex PH2LB's comment on the blog post of Owen Duffy (yesterday). 

----------------------

When I started the hobby, it arose out of technological curiosity, the interest in understanding things and the will to make things myself (designing myself was not my main goal). It doesn't matter to me whether it is 100% DIY or a kit (such as Heathkit, Elecraft, QRP-Labs etc) which is modified or not after construction. Just having fun with the hobby and pushing boundaries. And yes I also have some off-the-shelf transceivers (I'm super happy with my FT817ND) and my QO-100 uplink is also a kit (which is then already soldered a little more than average). As far as new tools are concerned: here at home are 2 types of 3D printers, various tools for SMT assembly, and I have a nice workshop equipped with tools and equipment for metal / plastic / wood processing. And every day I try to learn something new, because I stand by the IBEW moto : If you know stuff, you can do stuff.

Am I a maker then? I wouldn't call myself that. Just like I don't call myself a hacker because I'm quite handy with computers, technology and have certain skills. I'm just a hobbyist who wants to do and make things after work.
---------------------
Lex is a true member of the International Brotherhood.  He is the one who took our beloved stickers onto the European continent and into a Netherlands pub.  He is the one who -- unforgettably -- saw the parallels between ham shacks and the "pleasure room" of "50 Shades of Gray" (See below -- apropos of his current message, we labeled his meme "50 Shades of Homebrew") For more on Lex see: https://soldersmoke.blogspot.com/search?q=PH2LB

Lex's web site (Shack on the Internet):  https://www.ph2lb.nl/blog/index.php?page=hamradio

 Thanks Lex! 




Saturday, April 9, 2022

WD-40, a Hard Drive, a Coat-Hanger Antenna, Dumpster Diving, and Amateur Radio Satellites from the Azores

 

Last month I was talking to Ira VP2EIH on my new 1712 SSB rig.  Ira is interested in satellites.  Talking to him caused me to dig up some old material about satellite operations.   Here is a 2003 QST article about working the satellites from the Azores: 


Regarding the usefulness of WD-40, during my time in the Azores John EI7BA once told me that WD-40 is, "the Pope's pee!"  Apparently that is high praise in Ireland.  It is indeed good stuff. 

Messias CU2BJ is a Silent Key.  I hope Ray CU3GC, WL7CDK is doing well.  

Sunday, January 2, 2022

SolderSpace! N2CQR from Geostationary Orbit

 

Farhan VU2ESE kindly invited us to talk to his Lamakaan Amateur Radio Club.  They did a simulcast through the QO-100 Geostationary Satellite.  This picture shows N2CQR being beamed into India from 22,500 miles.   Note the ET-2 and the Mythbuster on the bench.  This was a lot of fun.  Thanks Farhan! 

Friday, December 10, 2021

The Lamakaan Annual Radio Convention Starts Today!

 


The Lamakaan Amateur Radio Club's annual convention begins today in Hyderabad, India.  This is Farhan's club so it is sure to be a great event.  Presentations are being live streamed on YouTube and on the QO100 geostationary satellite. 

Here is the link to the convention: http://www.larc.in/larc4/

Pete N6QW will be the first presenter and will talk about his new PSSST Rig. He will be speaking at 0430 UTC Saturday 11 December.  That is 11:30 pm on Friday, December 10 on the East Coast of North America.  

I will be speaking at 1130 UTC on Sunday December 12.  That is 0630 Saturday 11 December EST. I'll be talking about the Mythbuster rig and about the ET-2. 

Here is the schedule.  




Here's a time zone converter: https://www.timeanddate.com/worldclock/converter.html?iso=20211211T043000&p1=505&p2=250&p3=137

Here is the Lamakaan Club's YouTube Live Channel.  https://www.youtube.com/watch?v=cRznKwGgvDo

I don't know how we might be able to watch or listen via the QO100 satellite.  The U.S. is not in the footprint of this bird.  But there is a good WEBSDR receiver run by BATC and AMSAT DL: https://eshail.batc.org.uk/

Sunday, November 7, 2021

JPL, Mars Helicopter, Cube Sats, Ham Radio and more: N5BF talks to Eric Guth 4Z1UG


This morning Eric Guth has a really interesting interview on his QSO Today podcast.  
Courtney Duncan N5BF had a full career at JPL and is the current president of the San Bernardino Microwave Society.  There is a lot of interesting stuff in this interview, much of it about space exploration.  Courtney tells us about how experience with re-purposing radio gear came in handy at JPL.  For example, the helicopter that they have been flying on Mars has a very cheap and light off-the-shelf Zigbee transceiver.  He also talks about the origins of the Cube Sats.   

Here is Eric's page on this interview, with useful show notes: 

https://www.qsotoday.com/podcasts/n5bf

I like to listen to Eric's shows on YouTube -- here is the YouTube recording of the N5BF interview: 

https://www.youtube.com/watch?v=Fbr4jE11vfg

Here is N5BF's ham radio web site: 

http://cbduncan.duncanheights.com/HamRadio/HamRadio.html

Here is the club page of the San Bernardino Microwave Society:

http://www.ham-radio.com/sbms/

Thanks to Eric and Courtney! 


Sunday, October 31, 2021

Buy a Real Sputnik Satellite! Let's Put Sputnik Back in Orbit!

Only 85,000 Euros (that's the opening bid).  But hey, it comes with the receiver pictured on the right.  I guess that's so you can listen to the beeps. 

Here's the description: 

---------------

Laboratory Test Model of "Sputnik 1 EMC/EMI", 1957
1:1 scale test model of the satellite "Sputnik-1", serial no. "0K6-1/004/1957", with built-in transmitter (including modern 12-volt power supply), polished stainless-steel sphere, consisting of two threaded hemispheres of approx. 23 in. diameter with two pairs of antennae of 95 in. and 105 in. at an angle of 35 degrees to the axis, on stand with O-ring, stand approx. 59 in. high, stand and model together approx. 79 in. high, accompanied by a Tesla Maj 620A radio receiver, manufactured in Prague c. 1956, restored working condition, including replacement of the silver-zinc battery with a modern alternative and a new metal casing for the electronic transmitter. Note: Built at the Experimental Design Bureau-1 (OK?-1/OKB-1) factory, also known as S.P. Korolev Rocket and Space Corporation Energia, Koroljow, Soviet Union, in 1957, shortly before the launch of Sputnik-1. - An impressive artefact from the dawn of the space age, of which few models are known. - Provenance: From the collection of Dr. Frank Malina, USA/CSSR.

Start Price: EUR 85.000

---------------------------

I'm a bit suspicious of the "modern 12-volt power supply,"  the "modern alternative" battery and the "new metal casing for the electronic transmitter."

Here's the link to the auction: 

https://www.the-saleroom.com/en-gb/auction-catalogues/auction-team-breker/catalogue-id-breker10030/lot-9c87007d-f0ff-4414-9663-adc200690819

Here's my suggestion:  Musk or Bezos or Branson should buy this thing, fix it up a bit, and put it back in orbit.  So we can listen to it again. I know a version of this was done back in 1997.  But I think we should do it again, this time with the actual test model. 

Here are the earlier SolderSmoke blog posts about Sputnik and Sputnik-related projects: 

https://soldersmoke.blogspot.com/search?q=Sputnik

Steve Silverman sent the auction posting to me.  Thanks Steve. 

It just so happens that earlier in the week I was out at the Air and Space Museum facility near Dulles Airport, where I saw this flight backup of the Vanguard satellite: 

Tuesday, October 19, 2021

Homebrew Tiny Space Telescopes from the Netherlands


It is good every once in a while to step back from our electronic work benches and take a look at what other kinds of builders are making.   Hack-A-Day led me to this wonderful video from Holland.  There is great background information on telescopes, but the really great part is the interview with the Dutch fellow who is actually making -- in his home workshop -- these tiny telescopes.  Icing on the cake:  One of them will be used in a student Cube-Sat project in Oregon.  

Be sure to stay to the end for an intriguing presentation by Dr. Liam Fullersheit. 

Sunday, April 4, 2021

A Satellite Ground Station (Receiver) Made from Junk


Very cool.  This guy (who brew up on an island in Alaska) really knows how to use aluminum tape and the junk that fills most workshops. I like his use of the security camera mount as an az-el antenna rotator. 

I foolishly discarded a Direct TV dish.  I could have been receiving GOES images by now! 

Just last week I got the same RTL-SDR.com V3 dongle that he is using.  Very FB.   It does HF direct sampling with no hardware mods and no upconverter. 

More from the builder, Gabe Emerson (KL1FI): 


Monday, February 15, 2021

Jean Shepherd Works Through a Satellite in a School


Ah,  1975.  Obviously a very different time...  I'm not sure if Shep would fit in well in the classrooms of today.  There was bit of Rodney Dangerfield in his demeanor -- that would likely cause some trouble.
 
But this clip was fun.  Shep was right on target when he talked about how getting your ham license used to mean that you'd "mastered a technical art." 

The OSCAR satellite they were using was 2 meters up and 10 meters down.  There was a Heathkit HF transceiver with a transverter.  And a Simpson multimeter.  That mic was a Turner +3 

Thanks to Steven Walters for alerting us to this.  

EXCELSIOR!   
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column