Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Short Wave Listening. Show all posts
Showing posts with label Short Wave Listening. Show all posts

Thursday, March 7, 2024

The Wizard of Schenectady -- Charles Proteus Steinmetz

Such a beautiful article.   Ramakrishnan VU2JXN sent it to me.  It reminded me of how puzzeled we were when we found "Schenectady" on old shortwave receiver dials, amidst truly exotic locations.  Rangoon!  Peking!  Cape Town!  Schenectady?   Obviously this was due to General Electric's location in that New York State city.  But reading this article, I am thinking that the presence of Charles Proteus Steinmetz had something to do with it. His informal title (The Wizard of Schenectady)  confirmed that we have been right in awarding similar titles to impressive homebrewers. 

Here is the Smithsonian article that Ramakrishnan sent. 

https://www.smithsonianmag.com/history/charles-proteus-steinmetz-the-wizard-of-schenectady-51912022/#ixzz2lRMjrfit

And here is a link to a PBS video on Steinmetz: 

https://www.pbs.org/video/wmht-specials-divine-discontent-charles-proteus-steinmetz/

Here is a SolderSmoke blog post about "Radio Schenectady":

https://soldersmoke.blogspot.com/2020/07/radio-schenectady.html


Saturday, November 25, 2023

Some Short-Wave Listener QSL Cards

Click for a better view

I haven't received many, but I always like QSL cards from shortwave listeners.  Someone out there is listening!  


The top one is from recent contact. It arrived from Hungary via the W2 QSL bureau.  Here is Tamas HA00001: 




The middle one is from my youth.  in 1975 Nick in Moscow USSR heard my contact with OD5IO.   I didn't remember the contact with Lebanon.  It turns out that the operator was K4NYY (who is now a silent key.  See https://www.qrz.com/db/K4NYY/?mlab=). 


The bottom one pre-dates me by more than twenty years.   It comes from Berlin in 1936. W5AIR was heard working EI7F on 20 meter CW.   Does anyone have any info on this SWL? 

Over on The SWLing Post blog,  readers posted this info: 

Wednesday, November 15, 2023

Whole Earth Catalog Part II: More on SWL (and a Hippy One-Tube Receiver)

Click on image for a better view

Lee McKusick was correct about many things, but of course we were a bit disappointed by his focus on store bought gear.  But the 1971 Whole Earth catalog made up for this by publishing the schematic for a very simple single-triode receiver: 

Click on image for a better view

There is a follow-up article on grid leak detectors here: 

Tuesday, November 14, 2023

From the Last Whole Earth Catalog (1971) -- Short Waves -- Part 1

Click on image for a better look

Having recently returned from San Francisco, it seemed somehow appropriate for me to take a look into the Last Whole Earth Catalog  (1971).   I picked a copy of this book up some time ago.  There is some radio stuff in it, a lot of it on shortwave listening.  Above is one article. I'll post more in the days ahead. 

It was around 1973 that I gave my cousin's husband Mike an S38-E shortwave receiver.  It is a wonder that he survived.  He did report electrical shocks.  

Wednesday, February 1, 2023

Hammarlund HQ-100 Misidentified in 1963 FCC Film


Oh the indignity!  It appears at 7 minutes 16 seconds in this FCC film.  It is clearly an HQ-100, but the FCC subtitles identify it at an HQ-110.  It is clearly an HQ-100 ( the model without the clock). 

https://www.youtube.com/watch?v=LzPIOfpKkRM

As the owner and operator of what must be one of the few remaining HQ-100s, I feel obligated to defend the reputation of this fine piece of shortwave gear.   

How many of you have HQ-100s?  


Sunday, November 20, 2022

Watching Shortwave Broadcast Stations on the TinySA Spectrum Analyser


November 18, 2022 1244 UTC. I was using a TinySA spectrum analyzer to look at noise levels on the 40 meter ham radio band. I also wanted to take a look slightly above the band (in frequency) to see Radio Marti at 7355 kHz. As I was doing this I remembered that Vatican Radio was on the air at 7305 kHz from 1230 UTC to 1245 UTC. So was just going to catch the last moments of that day's transmissions. Sure enough, I caught it, and watched it disappear from the TinySA screen. See the video above.

Radio Marti continued on. In the morning we can hear the rooster recordings from that station. We are using it to test how well our homebrew Direct Conversion receivers avoid AM detection. In the video I mistakenly said these two transmitters were on the air with 250 megawatts. The correct power is 250 kilowatts. Both transmit from Greenville NC. I think the signal from Vatican Radio is stronger here because they are using a different antenna pattern -- Radio Marti is aimed at Cuba.

This reminds me of a cool project I have not yet done:  modifying the TinySA to allow the user to listen to the station: https://soldersmoke.blogspot.com/2021/10/how-to-listen-with-your-tinysa.html  I notice that Dean KK4DAS (my colleague in DC receiver design) was the only commenter on the blog post describing the TinySA mod. TRGHS.  We need to to do this. 

Here are the reports showing when Vatican Radio and Radio Marti were on the air on November 18, 2022: 



Wednesday, November 9, 2022

Direct Conversion Receiver -- Simple 2-Diode Mixer Defeats Radio Marti, but Diode Ring is the Best

 Here is another update on Direct Conversion receiver construction. In Northern Virginia we get very strong signals from the Radio Marti transmitter in Greenville NC. During the morning hours it is just above the 40 meter band at 7335 kHz. In the evening it is a bit higher in frequency at 7435 KHz. (in the video above I mistakenly give the morning frequency, when in fact they were on the higher evening frequency). In either case, Radio Marti has been a big source of unwanted AM breakthrough in our simple DC receivers. It now serves as something of a test of our bandpass filters and mixers.

In this video I try out the simple mixer described in detail here: https://soldersmoke.blogspot.com/2022...

The following morning, I tested the mixer with Radio Marti (in fact) on 7335 kHz. By adjusting the VFO signal input to the minimum value needed to turn on the diodes, I was able to bring Radio Marti AM breakthrough to minimal levels. But I could still hear it (weakly) in the background. Putting a very simple diplexer at the audio output of the mixer (just a .1uF capacitor in series with a 47 ohm resistor to ground) helped a lot.

I could also hear break through from Spanish-language broadcasts from Vatican Radio on 7305 kHz (using the 250 kW transmitter in Greenville NC) from 11:30-11:45. Perhaps most surprisingly, I was also getting AM breakthrough from 40 meter FT8!

Here is a short video showing the simple two-diode mixer in action during the morning hours:

I also tried out the more common two diode mixer with trifilar toroid. (In this one, the VFO turns both diodes on, then turns both of them off). The results were similar to what I got with the other two diode mixer.

We are trying to develop four circuits -- bandpass filter, mixer, variable frequency oscillator, and audio amplifier -- that will be simple enough for construction by high school students, but not so simple as to compromise performance. We want the receiver to work well.

So far, my conclusion is that the best results come from the diode rig mixer with two trifilar toroids. Here is a short video showing the diode ring in action on the morning of November 9, 2022:

Friday, June 17, 2022

SolderSmoke Podcast #238 -- SolderSmoke Shack South, Cycle 25, Chiquita Banana Radio, RCA, HQ-100, Mate Mighty Midget, Sony SWL RX , Mailbag

SolderSmoke Podcast #238 is available:  http://soldersmoke.com/soldersmoke238.mp3

TRAVELOGUE:  

Cathartic decluttering:  Bill preparing for future winter travel to Dominican Republic.  Will build SolderSmoke Shack South.  Dividing everything up:  Rigs, parts, tools, supplies, antennas, test gear.  Everything.  

OUR SPONSOR:  Parts Candy.  
https://www.ebay.com/usr/partscandy  Premium quality test leads! Hand cut, hand crimped, hand soldered, these will become your new favorite test leads GUARANTEED!

PETE'S BENCH:

-- Cycle 25 better? – Out here on the left coast – it is not evident
-- Chiquita Banana and the US Navy in early ‘wireless” operations.  Why RCA was created by the US Navy in 1919.
-- Update on the MAX2870 –someone has written the code to make it work with the Raspberry Pi and the QUISK SDR software
-- Field Day prep

SHAMELESS COMMERCE DIVISION:
 
Bill needs your help:  
-- Please watch his YouTube videos.  The longer the better!  Success based on hours watched. Great to have on while you are working in the shack. Just go to YouTube and search for the SolderSmoke channel. Or:  SolderSmoke - YouTube
-- Please put links to the SolderSmoke blog on your websites and blogs. 
-- How to USE the SolderSmoke Blog: Propagation, shopping, other sites... 
-- Please put comments under the articles on the SolderSmoke blog.  We like comments and dialogue. 

BILL'S BENCH:

-- Repair of the Sony ICF SW1 shortwave receiver.  Bad electrolytics.  Number Station receiving device? 
-- HQ-100   Q-Multiplier. BFO Switch. AVC.  Noise Limiter limitations.  Dave K8WPE: Old Radio Lessons.
-- MMMRX: Detector circuit. Alignment. Muting. On the air (40 AM with DX-100) 

MAILBAG: 

-- Bob Crane W8SX -- Great interviews at FDIM. On the SolderSmoke Blog. Thanks Bob! 
-- Dave Bamford W2DAB -- Stickers on the Upper East Side of Manhattan.  FB Dave! 
-- Farhan VU2ESE:  LADPAC software now available through W7ZOI' site.  
-- Lex PH2LB: Stickers in a Netherlands pub.  
-- Dave K8WPE Michigan Mighty Mite links.  Old Smoke idea. On the SolderSmoke blog. 
-- Rich WB4TLM was in the electronics class of CF Rockey W9SCH. FB. 
-- Dean KK4DAS Working on  his dad's HQ-170A. VWS maker group on mixers. 
-- Grayson KJ7UM -- Mixology article in ER. 
-- Pete Eaton -- Farhan's new analog rig: Daylight again!  Standby for more info from Farhan. 
-- Will KI4POV New HB Al Fresco single conversion superhet.  FB. 
-- Alvin N5VZH. Shep's "I Libertine."  Yes.  I laughed, I cried,  It changed me. 
-- Chuck KF8TI.  Mr. Wizard!  
-- Steve N8NM on the mend after some routine maintenance. 
-- Ben AB4EN is listening and likes the podcast -- Thanks Ben. 

May 1939 QST


Wednesday, May 25, 2022

HF Bandsweep with the Hammarlund HQ-100 (video)


It has been a while since we last did a bandsweep.  Too long.  Here is one using my recently fixed up Hammarlund HQ-100.  Repair details are in recent videos. 

For this bandsweep we cover most of the HF band and even briefly dip down into the AM broadcast band: 

Demonstration of the Hammarlund HQ-100: Radio Marti, 40 meter AM, 40 Meter SSB, 40 meter FT-8, 40 meter CW with and without the Q multiplier, classical music on WRMI, WFAX 1220 kHz AM, WWV 20 MHz, CB!, 17 meter SSB, the 20 meter BS position, the effect of AVC and the Noise Limiter, SSB with the internal BFO and with the Q multiplier as BFO. CW with the internal BFO AND the Q multiplier. 

Be sure to subscribe to the YouTube channel.  

Saturday, May 21, 2022

Repairing the Sony ICF SW1 Receiver -- Used for Numbers Station Reception? Why no replacement for C-625?


Ten years ago, my friend John gave me this tiny Sony receiver.  It wasn't working.   I tried to fix it but quickly discovered that the tiny size of the device made repair difficult.  All you needed to do was to swap out some leaking electrolytics, but they are surface mount electrolytics -- replacing them is not for the faint of heart.  Kits are available, but again, this is not easy. 

In 2020 I got one of the kits, but didn't try to use it until yesterday.   It only supplied six of the electrolytics.  In the video above, they discuss replacing seven electrolytics, including the one that seems to be placed in the round black holder. C-625.  Why didn't my kit include a replacement for that one?  Could it be that this capacitor was not one of the leaky SMD caps?  

Replacing these caps really wasn't easy. At one point I inadvertently removed not just the bad cap, but also a nearby surface mount resistor.  Luckily the schematic showed it to be 0 ohms.  That was easily replaced.  I lifted one of the pads on one of the other caps -- I just slid it back into place and hoped for the best. 

BTW, I just today discovered that this little receiver may have been used late in the Cold War by those who needed to receive messages from the infamous Numbers Stations: 

 https://www.cryptomuseum.com/spy/sony/icfsw1/index.htm

Thursday, April 28, 2022

Wednesday, March 30, 2022

Mike WU2D Looks at the "Dream" SW Receivers of the 1960s and 70s (Video)


Wow, I really liked Mike's walk down memory lane. I saw several of my own dream receivers: 

S-38E.  Indeed, this little monster did add some danger to your life.  AKA "The Widow Maker," I gave one to my cousin's husband so he could listen to what the commies on Radio Moscow were saying.  He later told me that the receiver had given him a shock.  I now have TWO S-38Es in my shack (two more than I really need).  I have installed isolation transformers in both of them, so they have lost the one element (danger!) that made them attractive.  

HA-600A. I got this one for Christmas in 1972.  The A model is MUCH better than the plain vanilla HA-600.  I recently got another HA-600A and found serious deficiencies in the Product Detector.  Has anyone else noticed these problems?  BACKGROUND INFO AND A PLEA FOR MORE INFO HERE: https://soldersmoke.blogspot.com/search?q=HA-600A+Product+Detector

HQ-100.  Got one in the Dominican Republic.  Fixed it up, repairing damages caused by radio life in the tropics.  Disabled the goofy audio amplifier circuitry.  I now wonder if this receiver might benefit from the insertion of a 455 kc ceramic filter. 

NC190.  Wow "Cosmic Blue"  Perhaps this was an early influence that led to "Juliano Blue?" 

HQ-180.  "18 tubes and almost as many knobs!"  FB!  

HRO-500.  Love the dial. 

Transoceanic.  Never had one, but built a BFO for the Transoceanic that W8NSA took with him to SE Asia during the war. 

R-390A.  I don't have a crane for the workbench.  

Thanks Mike -- that was a lot of fun.  

Wednesday, November 24, 2021

Gloria -- A Netflix Series about a Shortwave Broadcast Station in Portugal


Rarely if ever will we come across a high quality NETFLIX series built around a shortwave broadcast transmitter.  But that is what we have in Gloria.    It is really good.  We were especially interested in it because we lived in Portugal for three years. In addition to all the intrigue and drama you will catch glimpses of broadcast antennas, big transmitting tubes,  and one out-of-focus shot of what appears to be a Hallicrafters receiver (SX-42?)   

More info here: 

https://www.forbes.com/sites/sheenascott/2021/11/13/gloria-netflixs-first-original-series-from-portugal-is-a-great-spy-thriller/?sh=446cef9b30d7

Here's the NETFLIX link: 

https://www.netflix.com/title/81073977

Thanks to Thomas K4SWL of SWLing Post for the heads up


Thursday, June 24, 2021

Radio Netherlands -- Bonaire Relay Station


Thanks to Rogier KJ6ETL, PA1ZZ for sharing this video with us (that's Rogier on the Vespa). 

I wonder what they did with the towers and the transmitters?  





 

Friday, June 18, 2021

Jean Shepherd on CW, and Strange Propagation -- QRP!


From 1965.  Great CW stories from Shep.  QRP!  Shep running 2 watts on 20 CW, working DX. 

He discusses shortwave listening,  and predicted that CW shortwave listening would become more popular (sorry about that Shep). 

It was real hoot to hear the 1965 public service ad from NYC Mayor John Lindsey. 

The Kazoo CW was a bit hard to copy OM. 


Sunday, January 10, 2021

The Dream of a Shortwave Fiend

 
Thanks to Mark Rowley and Jeff Murray for posting this magazine cover on Facebook.

Friday, January 1, 2021

Glowing Numerals for the Lafayette HA-600A (With Jeweled Movements)

 


I really like this receiver.  I have strong sentimental ties: it was my first SW receiver.  But the frequency readout situation was kind of rough -- depending on where you put the Main Tuning cap, your Band Spread dial could be WAY off.  

China to the rescue!  Specifically the very nice San Jian PLJ-6 frequency counter boards.  I have used these in several projects.  I like them a lot. I get mine on e-bay.  They are very cheap.  Here is the manual with specs: 


As I did with my BITX20, I put mine in an Altoids-sized box.  I got to use my Goxawee rotary tool with circular metal blade to cut the rectangular hole.  Hopefully future efforts will yield neater results, but the flying sparks were fun;  they made me feel like one of those car-part  "fabricators" on cable TV. 

To tap the VFO frequency, I just put a bit of small coax at the point where the 10 pf cap from the VFO circuit enters the first mixer.  I ran this cable to the unused "Tape Recorder" jack on the back of the Lafayette -- this connects to the input of the counter.  I attached 11 volts from the power supply to an unused terminal on the accessory jack of the Lafayette -- this powers the counter.

Having a counter on the VFO proved very illuminating -- in more ways than one.  I measured the Center Frequency (CF) of my IF to be at 456 kHz.  I set the PLJ-6 to display the VFO frequency MINUS 465 kHz.   For AM broadcast signals, this worked fine:  I'd tune the signal for peak S-meter reading.  This meant that the carried was right at the CF.  

For SSB, things were a bit different.  I set the BFO knob  to be RIGHT AT 465 kHz when the dot is in the center position.  With the BFO there, I could tune in SSB signals.  The suppressed carrier would be right at the center of the IF passband, with the audio information above or below the suppressed  carrier frequency.  But it didn't sound good this way -- it sounded better if I would tune an LSB signal 2 kHz down from the center, then adjust the BFO down about 2 kHz.  This put most of the the audio in the peak portion of the IF filter(s) curve.  Doing it this way means that I have to remember that the number displayed on the PLJ-6 is 2 kHz down from the actual suppressed carrier frequency of the transmitting station.  I can live with that.  

I am going to leave the Lafayette on the corner of my workbench so that I can easily tune in hams  and SW broadcast stations.  Having modified the product detector and added the digital frequency readout makes listening to this receiver even more pleasing.  The jeweled movements are as smooth as ever. 

So 2021 is off to a good start on my workbench.  HNY to all!  

Tuesday, December 22, 2020

Listen to this! The Kearsarge Mountain Transmission System -- Winter Test Transmission -- 9670 kHz

This is a bit mysterious, but I think that is part of the allure.  Last week reports began to surface on reddit about a shortwave test transmission from a group called the Kearsarge Mountain Transmission System.  Kearsarge Mountain is in New Hampshire. Thomas K4SWL over at the SWLing Post Blog posted a link to a SoundCloud recording of the transmission:     

https://soundcloud.com/user-25048993/kmts-winter-test-transmission-9670-khz-17122020

I don't really know much about the origins of this recording, but -- like Thomas -- I really like it.  It is EXACTLY what you need to have playing in the background as you work on some piece of radio gear.  Trust me on this:  If you are a radio person, you WILL like this.   Have a listen at the link above. 

Here are some excerpts from the reddit posts on this: 

Notice of a KTMS winter test transmission beaming to Europe/USA on 9670 kHz at 2300 UTC on 17.12.2020. This transmission will consist of interval jingles, engineer test signals, rare re-media mixes of cult radio favorites, strange tones, and vox. Thank you for your continued attention as the KTMS crew continue working to bring the SWL community unique transmissions.

Our aim as the programmers of the KTMS Test Transmission is to entertain, edify and get SWLs excited about the possibilities inherent in radio. The crew of KTMS consists of amateur radio operators, community and college radio aficionados, antique radio restorationists, low budget radio astronomers looking for alien life and in general people who love the hobby of radio in all its many faceted aspects.

People who put their own funds towards creating radio on the shortwaves are helping to keep the shortwaves interesting and alive and bringing programming that is original and idiosyncratic to a medium that is often otherwise overrun by nationalists, spies, and fundamentalist preachers. They also help to keep shortwave stations on the air -something that ain’t so cheap. Rather, our view, is that by injecting some creative energy into a project such as our KTMS Winter Test Transmission we are giving back to the SWLing community by 1) creating a show for any listeners who happen to catch it, 2) giving the listeners a mystery that doesn’t revolve around numbers, 3) to do our part to keep the airwaves a little less stodgy.

We view this Test Transmission as an exercise in conviviality, surreality, and genuine love of all things radio and shortwave. 2020 has been such a serious minded year we aim to lighten that load with a bit of old fashioned fun.

For anyone who wishes to enjoy a nice winter evening around your set or online SDR we welcome you to get warm with us around the glowing tubes.

Thanks to all who tune in, and until then 73s.


Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column