Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Hamfests and Flea Markets. Show all posts
Showing posts with label Hamfests and Flea Markets. Show all posts

Friday, March 29, 2024

A QRP CW Contact (Video) with the Winterfest MXM SupeRX/TX 40 (1 Watt, Crystal Controlled Transmitter)

I picked this transceiver up at Winterfest for one dollar. 40 meters. Superhet receiver with 455 kc ceramic filter and 2 NE602s. Crystal controlled one watt transmitter on 7039.5 kc. I emailed Jeff KA2BKG and asked him to slide up a bit to my freq. I am glad he did. Thanks Jeff.

Monday, March 11, 2024

Radio Items Picked-up at VWS Winterfest 2024 Hamfest

As always, click on image for a better view

Above you can see what I picked up at the Vienna Wireless Society's 2024 Winterfest Hamfest. 

-- On the left in the blue box is an MXM Industries SuperRX/TX 40 transceiver. It is a kit from a Texas company.   Superhet receiver with IF at 455 kHz.  Crystal controlled CW transmitter on 7040 kHz.  The oscillator works, but so far no receive signals.  I will have to troubleshoot.  Does anyone have a schematic? 

-- Behind the MXM there is a nice box marked "Diode Detector" I opened it up and there is just a solid state diode and a 50 ohm resistor to ground.   Box may be useful. 

-- I got a couple of books: "Weekend Projects" 1979 from ARRL, and "A History of QST -- Volume 1 Amateur Radio Technology 1915 - 2013" 2013 from ARRL. 

-- On top of the Weekend Projects book you see a "Crystal Holder" from Gross Radio of New York City.  W1UJR has some good history on this company:  https://w1ujr.com/written-word/gross-radio-company-circa-1931/  This device seem to be intended to hold in place a raw piece of quartz!  Cool. 

-- To the right of the books there is a serious-looking VFO.  One dollar!  Deal!  It is a CB VFO, but the markings say it puts out 5.44 to 5.99 MHz.  So it should be useful.  The dual speed dial is very nice.  

-- Above the VFO is a nice step attenuator from the "Arrow Antenna" company of Loveland Colorado. 

-- Further to the right are some Electric Radio and Antique Wireless Association magazines that Armand WA1UQO gave me.  Really nice.  The AWA mags have a very thoughtful piece (warts and all) on Jean Shepherd.  And the ER pile has an article by Scott WA9WFA that mentions my work on the Mate for the Mighty Midget receiver.  Thanks again Armand! 

-- I also got some ADE6+ surface mount mixers.  The price was right! 

Thanks to VWS for putting on this great hamfest! 

Friday, December 15, 2023

Check out the Hyderabad, India Hamfest! LARC-6


This all looks very familiar.  It is very much like the hamfests and rallies I've seen in the US and UK. 

Note in the video above that we see the HF Signals table and our good friend Farhan VU2ESE.

I was privileged to speak to the convention about my Mythbuster transceiver: 
  
Joseph VU2JQE recorded and uploaded many short videos on the LARC-6 convention and hamfest.  You can see the on his YouTube page:  https://www.youtube.com/@VU2JQE  Thanks Joseph and thanks to the Lamakaan ARC. 


Thursday, June 1, 2023

George Heron N2APB talks about Coherent CW at FDIM: Interview #7 by Bob Crane W8SX

It was great to hear George's voice again.  I was a big fan of his "Chat with the Designers" podcast. And it was great to see that Pete Eaton WB9FLW (an old friend of SolderSmoke) was also involved in this presentation.  

At FDIM George was talking about Coherent CW.  Now, my views on CW have been made quite clear, but I am going to deliberately avoid snide comments about how Coherent CW might be a contradiction in terms.  Thank you.   I think this is something that Pete N6QW and I can agree on. 

Nevertheless, this is all technically interesting.  This reminds me of what happens with WSPR.  But I wasn't quite sure what George was getting at with his discussion of the phase of the incoming signal -- I can see the need to get the receivers' narrow filter exactly on the transmitting station's frequency, but why the phase?  

Here is Bob Crane's interview with George: 

http://soldersmoke.com/N2APB23.mp3

And here are a couple of things with background info on CCW. 

https://www.sigidwiki.com/wiki/Coherent_CW

http://www.arrl.org/files/file/Technology/tis/info/pdf/7509026.pdf

Thanks George, thanks Pete, and thanks Bob. 


Sunday, May 28, 2023

Greg Latta AA8V on Making Aluminum Chassis -- FDIM Interview by Bob Crane W8SX #2 (audio)

Our correspondent Bob Crane W8SX caught up with prolific builder Greg Latta AA8V.  Greg gave an FDIM talk on how to make aluminum chassis without having a machine shop.  I guess I am now going to have to buy a belt sander from Amazon.   

I was really glad that Greg mentioned his real passion: retro building.  FB Greg.  I have talked to Greg several times on the ham bands -- it is always an inspirational experience.  

Here is Bob's interview with Greg: 

http://soldersmoke.com/AA8V23.mp3 

Here is Greg's pdf file on his aluminum chassis construction technique.

https://www.frostburg.edu/personal/latta/ee/chassis/aluminumchassisconstructionnomovies.pdf 

And here is Greg's amazing web site: 

https://www.frostburg.edu/personal/latta/index.html

Thanks Greg!  Thanks Bob! 

Saturday, May 27, 2023

Hans Summers G0UPL and his new QMX: The Bob Crane W8SX FDIM Interviews Part 1 (audio)

http://qrp-labs.com/qmx.html

We are very pleased and grateful to present this year's series of Four Days in May interviews by our FDIM correspondent Bob Crane W8SX.   Once again Bob did an outstanding job interviewing the FDIM participants. 

In this interview, the amazing Hans Summers talks about his latest QRP Labs kit, the QMX.  It is a combination of the QCX Mini and the QDX.  

Hans explains the M:  QMX. The M is for Marriage. Magnificent. Merger. Marvelous, many things like that. It’s what you get when you marry the mechanical and conceptual design of QCX-mini, with the SDR, multi-band digital implementation of QDX. Simply: QDX + QCX-mini = QMX. 

It has a very clever switching power supply that automatically adjust to prevent spurs and harmonics from the power supply from appearing in the band of interest. 

I was especially interested in his plans to implement an SSB option in future software updates.  Hans will use the same very complicated SSB generation scheme used in the trueSDX rig, but hopes to achieve higher performance and  improved signal quality due to the much more robust hardware of the QMX. 

Here is the interview: 

http://soldersmoke.com/G0UPL23.mp3

Here is the QRP Labs site about the QMX:  http://qrp-labs.com/qmx.html

Here is the QRP Labs web site: http://qrp-labs.com/

And here is a really wonderful and very current article by Hans on the evolution of QRP Labs and its rigs from 2010 right on up through 2023 and the QMX.  It is really interesting: 

http://qrp-labs.com/images/qmx/docs/fdim2023.pdf

Thanks to Bob Crane W8SX, Hans Summers G0UPL, and all of the FDIM organizers. 

Hans G0UPL-- Homebrew Hero

Wednesday, May 17, 2023

Farhan Visits Northern Virginia En Route to FDIM (Videos to Follow)


Mike KD4MM, Farhan VU2ESE and Dean KK4DAS

Farhan VU2ESE was in Northern Virginia this week, on his way to the Four Days in May Event at the Dayton Hamvention.   We had a great visit with Farhan.  We took him out to the Thomas Jefferson High School for Science and Technology where he shared with the students tribal wisdom about building CubeSats and about building simple direct conversion receivers.  Farhan's use of direct conversion receivers to teach homebrewing to students in Hyderabad inspired our efforts in Northern Virginia.  We often referred to Farhan when speaking to the students here, so it was really great to give them a chance to talk to him directly. 


From the high school we went to the local restaurant at which Vienna Wireless has its weekly lunch. Many of the people at this lunch are also members of the VWS makers group.  This was a lot of fun. 


Don KM4UDX even brought in his somewhat eccentric build of the uBITX transceiver designed by Farhan.  Don's rig is labeled "The uBITX of Life."  It has also been called "The Franken-uBITX." Whatever the name, Farhan was clearly pleased to see Don's handiwork. 

I shot a lot of video during Farhan's visit (last time I failed to do this and regretted it).  I will put these videos up on the SolderSmoke YouTube channel during the days ahead. 

Thanks Farhan! 

Monday, March 20, 2023

Winterfest Loot: Who Can ID the Homebrew Receiver?


First a big congratulations to the Vienna Wireless Society and its President, Dean KK4DAS.  In spite of low temperatures that made the Winterfest Hamfest live up to its name, this year's 'fest was a big success with excellent turnout both by buyers and sellers.  There were a LOT of older rigs -- on one table I saw three HT-37s.   It was all great. Here is a video of the hamfest.  https://www.youtube.com/watch?v=oheht5jCuKE&t=619s  This was shot early on Sunday morning March 19, 2023, about 30 minutes after it opened.  An hour later there were a lot more customers. 

One of the first things I bought was the item pictured above.  I bought it mostly because we are currently building 40 meter receivers with the local high-school students.  I didn't have a screw driver, so I couldn't open up the box.   Something was rattling around in there.   I worried that the box might be mostly empty.  Or that it would have one PC board with a sad collection of ICs.  But in the hope that I would find something truly homebrew, I bought it.  

Below are pictures of what I found inside.  Can anyone tell us what this is?  ( I recognized it immediately.)  More on this device in due course. 



Other loot from the 'fest: 

The one on the left I've been using since around 1998!  It is getting beat up.  I bought the one on the right at the 'fest.  It is in much better condition.  5 bucks.  TRGHS. 

I always wanted one.  I had nice leather case, but I gave it to Dick Dillman years ago. I now feel like a real boatanchor guy.  I got for 15 bucks.  I see on Amazon they are selling for $466! 


I had one as a kid.  Will be useful in the DR.  In great shape. 

Eamon Skelton's book was a great find.  As were the early editions of SSB for the Radio Amateur.  Eight bucks for the whole lot.

I like homebrew speaker enclosures.  They add soul to the new machine. Perhaps a prize for the high-school project.  Three bucks. 

Finally, this thing.  Plagued by guilt for past cannibalizations of QF-1s,   I was going to pass on this one, but I realized that my friend Dean KK4DAS would be on his way, and if I didn't take it (and extract the variable capacitor) he would.  So I bought it.  But I may leave this one as is, for possible use as the The Radio Gods intended.  It could use some cleaning up.  It seems to have a coat of nicotine. Ten bucks. 

I also picked up a few larger knobs that may be of use with the high-school receivers. 

Friday, February 3, 2023

CuriousMarc (AJ6JV) Goes to a Hamfest


Jean Shepherd once said that all of us at one point come to a cross-roads in our lives -- one road leads to success, the other to ham radio flea markets.  

As I watched this, I realized that CuriousMarc sounds like a ham.   Sure enough, some Googling revealed that his real name is Jean-Marc Verdiell and his ham radio callsign is AJ6JV. 

I knew Marc was one of us when, in the video, he opens up the teletype.  He says that the seller claimed that it still worked.  But Marc comments that he hopes that this is not true, so that they will be able to troubleshoot and fix the device.  FB.  That's the spirit.  

We are really lucky to have someone as successful and creative as Marc in the ranks of ham radio operators.  

Be careful with the high voltage Marc!  

Monday, June 20, 2022

QRP Labs HQ Tour


Really cool to see Hans describe his QRP Labs workshop in Turkey.  Lots of soul in that worshop.  Thanks Hans.  

 And here is a 2022 Turkish media interview with Hans and his team in the workshop:  

Tuesday, June 14, 2022

Hans Summers G0UPL Wins FDIM 2N2222A Power Out Challenge -- 4.1 Watts from Two 2N2222As


Farhan told me how cool this was.  And he was right.  It looks like a lot of fun.  Congratulations Hans! 

 

Friday, April 1, 2022

SolderSmoke Podcast #236 -- Bill's 17-12 Rig, Pea Shooter, VFO Wisdom, Temp Compensation, Need Code for Max2870, Making Enclosures, MAILBAG

ARC-5 R-23 Nav Receiver Parts

SolderSmoke Podcast #236 is available!

http://soldersmoke.com/soldersmoke236.mp3

Winterfest!  Many Boatanchors.  Lots of old good analog test gear.  Talk with Dean KK4DAS.  Met up with Armand WA1UQO and Charles AI4OT. 

Pete's Bench: 

-- Looking for help in software development for MAX2870 board.  
-- Tapped Capacitance Impedance Matching
-- The Pea Shooter (See N2USD's version in videos
 below).
-- Tribal Knowledge on Making Enclosures

Bill's Bench: 

-- 17-12 Band Imaging SSB Transceiver.  It works on both bands. 
-- Plan for Glowing Numerals (N6QW has been there and done that!)
-- WU2D's videos on VFOs.  
-- Temperature Compensation:  HT-37 capacitor.  FT-101 VFO,  even in the ARC-5 receiver! 
-- Trying to get more rigorous about receiver design.  Gain distribution, IMD, Dynamic Range, etc. 
-- Do I need a true RMS audio voltmeter?  Or can I get the same info from freeware audio spectrum analyzer and soundcard?
-- 6EA8s replace 6U8s in MMRX 

SHAMELESS COMMERCE DIVISION:   We have a sponsor!  

PARTS CANDY out of Chicago produces quality test leads for your bench.  The guy who runs the company is Carlos, and he is one of us.  He is an electronic tinkerer. See the ad on the left hand column of the SolderSmoke blog.  Just click on the picture of the test leads and you will be taken to Carlos's ebay store.  Go for it. 

Mailbag

Walter KA4KXX in Orlando -- Diodes in BITX Bilats -- Why?  Farhan says To prevent reverse junction of off transistor from conducting and clipping waveform. 
Tony G4WIF -- Audio test gear and G3ROO paraset
Todd K7TFC Pine boards, TIAs and 12 meters
Dean KK4DAS  Ceramic Variable Oscillators on 40.   Juliano Criteria? 
Mike WU2D   VFOs and Temp compensation. ARC-5s
Chris KD4PBJ   A really nice parts care package -- Thanks Chris! 
Steve M0ECS.  Inspired by SS, moved something off the Shelf or Box of Shame. 
Jason KD2RKN Building a DC receiver.  It is all our fault. 
Chris Mannon in Indiana joining the CBLA
KC4GMH is listening! 
Ed N2XDD has been armed with a 3.579 MHz crystal.  
Harvey Wa3EIB working on his museum 
Tim AG4RZ is BACK IN THE SOLDERSMOKE! 
Fred KC5RT -- an old friend -- recommends Bangood RF sig gen for 88 bucks. 
Shlomo 4X4LF listening and homebrewing from a Kibbutz in Israel. 
Chuck KF8TI was a Peace Corps Volunteer in the Philippines. 



Monday, March 28, 2022

Vienna Wireless Winterfest Hamfest 2022


After a two-year pandemic hiatus, yesterday the Vienna (Virginia) Wireless Society's annual "Winterfest" hamfest was back.  And the weather was in fact COLD -- it definitely felt like Winterfests of years-gone-by. 

Club President Dean KK4DAS kindly invited me to participate in a forum on homebrewing.  You can watch the presentation STARTING AT 2:04:06 (hours:minute:seconds) here: 


It was especially cool to be able to tell the audience about Pete N6QW and Farhan VU2ESE. We talked about Pete's Simple SSB transceiver, the Michigan Mighty Mite and the BITX rigs. 

Some observations on the hamfest scene: 

-- There are lots of boatanchor radios out there, and it seems like a buyer's market.  These old rigs do not seem to be selling nearly as fast as they did a few years ago. 

-- There is a lot of older analog test gear on sale too, and it too seems to no longer be as in demand as it was a few years ago.  Perhaps the availability of cheap, small, and very effective digital oscilloscopes is affecting the sale of these once sought-after items. 

My purchases: 

-- A really old beat-up (crashed?) ARC-5 R-23 receiver.  I have already extracted the variable capacitor. 
-- A nice box of smaller variable caps. 
-- 100 feet of 550 parachute cord. 
-- Two nice metal chassis/boxes 
-- A bag of shaft adapters/connectors

With Armand WA1UQO (left) and Steve Boles W4SB (center)

With Charles AI4OT 

Thanks to Dean KK4DAS and the entire VWS team for a great event. 

Saturday, February 27, 2021

Jean Shepherd Goes to a Hamfest -- And Much More


Here is something nice to listen to in your shack...  

I hadn't heard this one before.  It is about Shep's teenage trip to a hamfest, but it also about his youthful enthusiasm for ham radio and electronics.  Many of us can identify with this very easily. 

He talks about what must have been a very early use of "blue boxes" -- the audio tone generators that allowed young miscreants (including the Woz) to make long distance phone calls for free. I wish I had gotten into this.  It sounds like fun. 

He talks about how painful it was to be on phone (AM phone) with just 2.5 watts homebrew, when everyone else was running a lot more power. 

And wow, they played a baseball game at the hamfest.   Phone guys vs. CW guys. 

I won't spoil it by telling you the results of the hamfest raffle.  

Tuesday, January 28, 2020

Junk Box Ethics -- I Plead Guilty! (video)



I cringed when, at about the 32 minute mark,  during a discussion of the moral necessity of preserving old gear, Michael appeared on the screen with a Heathkit Q multiplier sitting right there next to him.  It was as if he was talking about me.  I felt as if I had been hauled into Ham Radio Court, Judge Michael Murphy presiding. 


I have already REPEATEDLY admitted to sacrificing MULTIPLE Q MULTIPLIERS.  But I did it for good reasons:  

1)  I have some objections to use of regeneration, especially in superhet receivers.  After all, Armstrong created the superhet in part to free us from the tyranny of regeneration (that he had also invented).  

2)  This is a case where the parts ARE greater than the sum.  Specifically that variable cap WITH reduction drive.  And that perfectly sized metal box. Those capacitors are currently in service in at least two of my homebrew SSB transmitters. And as I look around the shack, I see one of those boxes housing an Si5351 VFO, and another holding the dual-digital frequency displays for my DX-100/HQ-100 AM station.    

3)  Mike notes that these Q-multipliers are being sold for TWO DOLLARS at hamfests.  At prices like this, temptation is just too strong. 

So I plead guilty, your honor.  But I ask the court to consider the circumstances under which I dismantled this obsolete gear, and the good uses that I made of the parts that I obtained.  Also, I'd like to make note of the fact that I salvaged from a junk pile a Heath VF-1 (I completely rebuilt it) AND I restored to usefulness a Heath DX-40 -- both these devices appeared in the WU2D video.  Finally, if anyone really needs the remaining parts from the now deceased QF-1s, I'd be willing to donate them (in an effort to redeem myself). 

Thanks Mike!  

Monday, November 4, 2019

Melbourne Australia -- QRP By the Bay 2019



Each November, Peter Parker VK3YE and his ham colleagues from Melbourne share with us reports on Peter's annual "QRP by the Bay" event.   

I think VK3HN should seek a trademark for that hat.  As soon as I saw it on the table in the video above, I knew these were Paul Taylor's rigs.  FB Paul.  Here is Paul's report: 

https://vk3hn.wordpress.com/2019/11/02/qrp-by-the-bay-chelsea-beach-melbourne-2nd-nov-2019/

Great work guys.  Thanks a lot.  73 

Friday, June 1, 2018

INTERVIEW: Bob Crane Talks to Jack Purdum W8TEE at FDIM. Definition of "Homebrew."


Jack Purdum has been making enormous contributions to the radio art.  His background with digital technology has opened many doors for homebrewers, especially through his books on the use of the Arduino microcontroller.   I think his new "JackAl board" is really going to shake things up.  I was glad that our correspondent in Ohio, Bob Crane W8SX, caught up with Jack and interviewed him for soldersmoke: 


But I have one small disagreement with Jack.   It has to do with the definition of "homebrew."   Jack seems to define true homebrew as "designing and building your own rig from scratch."  My problem is with the "designing" part.  By this definition, those intrepid heroes of days-gone- by who saw a schematic in QST, ripped apart some old broadcast radios, and used the parts to build a 50 watt CW transmitter with a regen receiver were not true homebrewers.   I would maintain that they were.  I agree with Jack that kit building is a bit different, and of course designing the rig yourself earns you the coveted "designer" designation.  But for me, if you start with a schematic and an article, gather the parts and build the thing yourself, that is a homebrew project and you are a homebrewer.  After all, even the designers are very often making use of standard blocks of circuitry (Colpitts oscillators,  common emitter amplifiers, power supply circuits, etc.)

I think we will have to turn to our lexicon expert Steve Silverman for a ruling.  

In any case, thanks to Bob Crane and to Jack Purdum. 




Wednesday, May 30, 2018

Hans Summers and his QCX -- G0UPL Cracks the Code on Si5351A Quadrature


Pete,  Brad WA8WDQ and I were recently e-mailing about our admiration for what Hans G0UPL has achieved with his QCX rig.   I cc'd Hans -- we got this nice and very informative e-mail.  Be sure to click on the link provided by Hans, and from there go to the link to his FDIM proceedings article.  I think that article is a real masterpiece -- there is a lot of very valuable information in there.  For a long time, getting quadrature output from the Si5351 seemed like an impossible dream.  But Hans has obviously figured out how to do this, opening the door to much better and simpler single-signal phasing receivers.   Thanks Hans!  


Hi all

Thanks for the nice feedback on the QCX and the FDIM conference proceedings a article, which I have published on QRP Labs web page along with other Dayton trip miscellany. See


My seminar presentation audio was recorded by Ham Radio Workbench podcast and they will be publishing it on 5th June.

The QCX kit has indeed been unbelievably popular, almost 5,000 kits have been sold since the launch on 21st August. It seems to have itched an itch that needed itching, in the QRP world. Sales continue to be strong and I'm currently preparing another batch of 1000 more. 

I'm very proud of my 90-degree quadrature Si5351A and it helped me towards my low cost, high performance target for QCX. Abandoning the 74AC74 saves a part, reduces cost, reduces complexity, reduces board area (and hence more cost) and even seems to provide better performance (higher unwanted sideband rejection when using the Si5351A in quadrature mode). Getting the Si5351A to do this is one of those things which look easy afterwards. But at the time, and faced with SiLabs un-useful documentation, it took an awful lot of headscratching, trial and error!

I'm not sure of the answer to the question about noise figure. Certainly radios such as QCX and the NC2030 which use the QSD architecture seem to have very high sensitivity without an RF amplifier ahead of them. This must indicate a low noise figure. 


73 Hans G0UPL 

Sunday, May 27, 2018

INTERVIEW: Four Days in May 2018 -- G0UPL Hans Summers talks to Bob Crane


Once again, our correspondent Bob Crane W8SX has gone to the Four Days in May event and has sent back some really great inteviews with those who made presentations there.  

First on the list was Hans Summers G0UPL.   Hans is a justifiably famous Homebrew Hero, and a member of the QRP Hall of Fame.   The latest of his many contributions to the hobby is his amazing QCX transceiver.  Like the BITX rigs, the QCX refutes the idea that hams need to spend kilobucks to get on the air with a decent rig.  Priced at around $50,  the QCX offers excellent performance.  And it comes with built in test gear:  the signal generator you need to align the rig COMES IN THE RIG!  FB Hans.  

I think it was Pete who noted that the price range for rigs like the QCX, the BITX, and the uBITX is in the $50 to $110 dollar range, meaning that "One hundred bucks is the new three thousand bucks."  We owe a lot gratitude to Hans and Farhan for this very positive paradigm shift. 

Listen here for Bob Crane's 2018 FDIM interview with Hans: 

http://soldersmoke.com/G0UPL-18.mp3

We all also owe a debt of gratitude to the QRP ARCI folks who did all the hard work that goes into organizing Four Days in May.  Special thanks to QRP ARCI Preston Douglas WJ2V, and to FDIM Chair Norm Schklar WA4ZXV.  FDIM is one of the most important events on the Homebrew/QRP calendar. 

More info on the QCX (and order yours) here:  https://qrp-labs.com/qcx.html

Sunday, March 18, 2018

Haunted by Hallicrafters At Winterfest


I was on the verge of not going to the Vienna Wireless Society's Winterfest Hamfest this year.   We had just returned from a long trip.  I was tired.  Armand WA1UQO bailed due to a family obligation. But, since this is about the only hamfest that regularly attend, and because it is only about 5 miles down the road, I went.  

As soon as I got there I started wondering if I should have stayed home.  Here's why:  Hallicrafter S-38s.   Just about everywhere I turned, there were S-38s.  I had never seen so many of these EVIL  AC/DC trandformerless widow-makers.  I watched in horror as innocent hams reached into their wallets and bought these little monsters.  "Does it work?" asked one victim. "Well," said the seller, "it hums like crazy when you turn it on."  Yea, I'll bet it does.  (The guy bought it.) 

It was kind of a Hallicrafters day.  I even saw an Hallicrafters TV!  See above. 

Nothing big followed me home.   I got a couple of nice variable caps (one with a reduction drive).  A Radio Shack speaker.   Some coax.  A project box of BITX40 size.   A Weller soldering gun  slightly less beat up than the one I've had since age 13. 

I got to meet Richard Choy of Midway Electronics.  He has a business out in the Shenandoah Valley and is selling a neat little 2 watt CW transceiver kit.  Go to midwayelecrronics.us/qrp for more info. 

Oh yea, I got a kick out of this ENORMOUS BFO.  I almost bought it for Pete (who is so fond of tiny little oscillators).  This is a real Boatanchor BFO.  I wonder how many Si5351s you could put in that box? 


Thanks to VWS for putting on the 'fest.  In spite of the S-38s, I had fun.  
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column