Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Dominican Republic. Show all posts
Showing posts with label Dominican Republic. Show all posts

Thursday, February 22, 2024

Some of my Double Sideband Rigs: Azores, Virginia, Dominican Republic


The above video describe a round of mods to the much modded DSB rig. And my alleged winning of the ARRL Sweepstakes (in a very elite category). 

The video above shows where I took the rig in 2014.  Bahia Rincon, Samana peninsula, Dominican Republic.  You can also see my power supply. 

Here is an article on the first DSB rig that I built, out in the Azores:  

https://www.gadgeteer.us/17METER.HTM


I think the article captures well the trials and tribulations faced by new homebrewers, perhaps with the twist that comes from being out in the middle of the Atlantic ocean.  

Mike WU2D is having similar fun with his homebrew 10 meter DSB transceiver: 

I was struck by how similar Mike's early QSO experiences were with mine.  We both put our DSB transmitters on the air before they made their way into real cabinets or boxes. 

Here's mine from 2001 in the Azores: 

Tuesday, January 30, 2024

Yet ANOTHER Homebrew 15-10 SSB Transceiver (Video #1)


A homebrew 15-10 SSB Rig for the Dominican Republic:

This is my second build of this rig.

I am using a 10 pole crystal filter that I built for the first build, but did not use. I am also using the tuning capacitor from a Galaxy V's oscillator -- I like the anti-backlash gears and the reduction drive. This rig is built on a pine board covered with adhesive copper tape. It has been built stage-by-stage on copper-clad boards using the Manhattan construction style.

The structure of the rig is basically that of a BITX rig -- the RF and IF amplifiers are Termination Insensitive Amplifiers.

Soon the receiver will be completed. I will then build the stages needed for the transmitter portion of the transceiver.

I will take this rig with me to the Dominican Republic.

Friday, December 29, 2023

7J6CBQ on Okinawa -- And a Translation of a Science Fiction Novel about Ham Radio in China

 


The article about Sergeant Malik Pugh USMC on Okinawa brought back memories from the 1990s. David Cowhig was 73 Magazine's Hambassador on Okinawa -- I had the same "position" in the Dominican Republic.  David and I were both in the Foreign Service;  we joked that 73 had afforded us our only chances to be ambassadors of any kind.  David's Okinawa QSL and the opening from his initial report to 73 magazine appear above.  You can see more here: 







A couple of my own "dispatches" as Hambassdor to the Dominican Republic appear here: 

Back in the 90's David sent me an old QST Magazine.  I wrote about this on the SolderSmoke blog: 

Later, I learned about another "Hambassador" who was still active as a radio amateur: Ron Gang 4X1MK:  

Finally (and this is really cool):  David Cowhig has been putting his language skills to good use, translating Chinese written material.  He sent me his translation of the opening chapters of a Chinese science fiction novel about ham radio.   Readers of the SolderSmoke Daily News will like this: 


We Live in Nanjing 《我们生活在南京》

Thanks David! 

Friday, February 17, 2023

Ham Radio Pico Balloons Feared Shot Down by USAF


The Aviation Week article below helped to confirm some of my worst fears about the balloon thing.  For a long I've wanted to launch one of these balloons.  Recently I've been thinking about doing it from SolderSmoke Shack South (in the Dominican Republic -- they are BIG on party balloons down there!). 

https://aviationweek.com/defense-space/aircraft-propulsion/hobby-clubs-missing-balloon-feared-shot-down-usaf?fbclid=IwAR0ra3U4QPlzrNiVDNXz1UzQdDNfFUpccrQIRhVaCKkrZWHIPXQ0hwxEVKI

Check out Hans's site about the circumnavigators: 

http://www.qrp-labs.com/circumnavigators.html

Friday, February 10, 2023

SolderSmoke Podcast #243 -- HI7/N2CQR, uBITX mods for 10 meters, High-School Direct Conversion Receiver Project Launched (Success!) Mailbag

 
DC RX and one of the PTO boards we built as demos last night. 

February 10, 2023


SolderSmoke Podcast #224 is available. 


http://soldersmoke.com/soldersmoke243.mp3


Video here: (32) SolderSmoke Podcast 243 (video) Hi7/N2CQR, uBITX, Success with High School Receiver Project - YouTube


Pete N6QW had technical difficulties this morning.  He insisted that the show must go on.  Pete will be back for the next episode. 

 

Travelogue: 

Bill in the Dominican Republic for all of January.  

HI7/N2CQR  Eastern tip of the island. uBITX and dipoles. 

20, 17, 10.  CW and SSB.  SSB was tough and I had reports of RF getting into the signal.

Went to CW. 

Worked VWS Mike KA4CDN, and Walter KA4KXX on 20CW.

Finally moved up to 10 CW.  Lots of contacts. Even though uBITX very QRP on ten.

I am modifying the uBITX now.  

Copper tape shielding to keep RF out.

 Low power out not the fault of the IRF-510s.  The problem is the 2N3904s.

Will replace with 2N2222 in To-18 cans.

Dean KK4DAS putting KD8CEC software into Arduino.  I gave up.

Who sent me this orphan uBITX?

SolderSmoke Shack South in final phase of construction.

 

SHAMELESS COMMERCE DIVISION:

Patreon!

Bezos Shopping!

 

DC Receiver Project

Local High School radio club. 

Simple:  Like Herring Aid 5 and Wes’s original.

Farhan’s four stages:

BP Filter, Diode Ring, PTO, AF amp. 

Simple Colpitts PTO SURPRISINGLY STABLE.

Simple and easy.  No chips.  No complicated circuits.

Guys have helped test out the design:  Rick N3FJZ, Walter KA4KXX,

Daniel VE5DLD, Stephen VK2BLQ and others. 

First session last night:  We demonstrated build of the PTOs.  

They worked (thank God).

 

Open Circuits book.

Envelope Detection Controversy

Save the Antenna – Book “Losing the Nobel Prize” K1JT

 

MAILBAG

--Dean KK4DAS 10 meter DSB!  Tiny SA ULTRA! FB

--John AC2RL on Elmer W3PHL DSB guy

--AC3K reports inventor of Fender Stratocaster guitar was a ham: W6DOE

--AF8E was doing POTA.  I worked him. He said my rig had presence. FB

--Alain F4IET FB DSB rig with mic in Cigar can!

--Daryl N0DP worked him on SSB.  He is homebrewing

--Steve N8NM was in for repairs but is on the mend.

--Rick G6AKG working with sub-harmonic mixers and logic chips

--Paul HS0ZLQ Built DC receiver but looking for something else to build. No DSB!

--Steve AB4I – Coherer, Jagadish Chandra Bose, and Marconi

--Eldon KC5U    Worked VK5QD right after me and mentioned SolderSmoke FB

--Todd K7TFC is building the DC RX.

--Tony G4WIF and Ian G3ROO using automotive relays for antenna switching. FB.

--Dave WA1LBP Great to hear from my fellow Hambassador (Okinawa)

Older post comments:

--Scott VO1DR was also in CF Rockey’s class! (Blog comment)

--Aurora Aug 4, 1972: Twelve people shared memories.  (Blog comment)

--Will WN1SLG Googled novice call and was led to my Novice log.(Blog comment)


Saturday, January 21, 2023

My HI7/N2CQR QSL Card


My fellow Vienna Wireless Society Member Ron WA6YOU is a real expert collector of QSL cards.  He was rightly critical of a very crude homebrew QSL that I made a while ago.   So when I got back from the Dominican Republic I decided I had to clean up my act.  Some Googling, some printer ink, and some cardstock later, I came up with the above.   I kind of like it -- it looks better (believe me!) than my earlier effort, but it retains an element of homebrew (I kind of made it myself).  

The picture is of Juanillo Beach, the beach we use when in Cap Cana.  This one was filled out for Mike KA4CDN, who was the only Vienna Wireless Society member I contacted from HI7.  

I made about 38 contacts from HI7.  If anyone out there worked me and wants a card, my printer is at the ready!  

To make the card, I used:  https://www.radioqth.net/qslcards

Sunday, January 15, 2023

Working Walter KA4KXX from Hispaniola

 Walter KA4KXX in Orlando has been a prolific builder of rigs for many years, and has been a great friend of SolderSmoke:  Here are some of the SolderSmoke podcasts and blog posts in which Walter's solder melting was mentioned: https://soldersmoke.blogspot.com/search?q=KA4KXX

As we approach the end of our current stay in the Dominican Republic, I could not miss out on the chance to work Walter with his homebrew rigs.  Even though the space weather was stormy, and my dipole was droopy, we arranged to meet up on the high end of the 20 meter CW band this morning.   See the results in the video above.  A solid QSO with Walter.  He says it is HB2HB, but truth be told I was on a uBITX that was built more by Farhan than by me.  But this was a great contact.  Walter started with a 50W rig, then switched to his 3 watt rig with a DC receiver.  FB

Here is the e-mail I received from Walter after the QSO: 

Dear Bill:

Many thanks for the great video, and when
you return to Virginia look for your mailman
to bring a postcard from me!
Just after your phone call this morning I scanned
the band from 14.025 to 14.300 and heard only one
SSB QSO at 14.347, and even now I only hear
a half dozen SSB signals, so that makes what
we did even more amazing. 
The first photo below is my 3.5 watt NE602 direct conversion 
rig which is about 2 years old.  The transmit signal is created
by putting a 3 MHz VFO signal into an NE602 mixer with an 
11 MHz crystal, so the rig can receive CW and SSB from 
14.025 to 14.300 and can transmit CW anywhere in that range
with good frequency stability. 
The bottom photo is my new full break-in CW 50W rig which 
I just put on the air about a week ago and is still in the finalization stage.  
I am not yet happy with it, but then again I am more particular
now than I used to be.  It is really a trans-receiver with a single 
conversion superhet receiver at the bottom of the board using 
an NE602 pair with a 3-crystal 4 MHz 900 Hz bandwidth filter, 
and a single 10.080 crystal VFO which is tuned with a polyvaricon
for operating between 14.061 and 14.068 MHz.  
At the top is the VXO transmit section using a pair of 14.070 
crystals pulled down into the operating range.  This signal
is buffered and amplified to about 500 mW which is all that 
the MRF101 RF Power Amplifier needs.  Visible behind the
board is an AC-powered 24 VDC switching power supply which 
is connected in series with the 12 VDC battery to 
power the final stage with about 36 VDC.  The main 12 VDC is 
provided by a bench power supply which is not in the photo.
In both rigs the morse code key is the microswitch 
at the lower right corner.  (Way more handy and elegant 
than your key, I might say?)
This morning each of these rigs was connected to its own
end fed half wave antenna, one in my backyard 
and the other on the side of my house.  My antenna analyzer
shows them to be essentially equal, but my 50W rig does
not like one of them at all.
Making our international homebrew-to-homebrew contact 
today was a terrific ham radio experience, so thanks for all 
you do!
73,
Walter 
KA4KXX
Orlando, FL

image.png

image.png

Working Vienna Wireless Society member (KA4CDN) from Hispaniola


We'll be heading back to the States soon and I was feeling guilty about 
not having worked anyone from my home club (the Vienna Wireless Society). 
On Wednesday night I Zoomed in to the club's Maker group -- this made me want 
to make at least one contact with the club.  Plus Walter KA4KXX  in Orlando has 
been trying to set up a sked on 20... This morning I saw that the SFI was up above 200. 
I lengthened the dipole so it would resonate on 20 meters (on this trip it started on 20, went to 17, back to 20, down to 10 and now, back to 20!). I worked one station on SSB, then sent a text to the club's DX spotter group, saying that I would be calling CQ on 14.060 MHz.   Soon I got a call from club member (and Maker) Mike KA4CDN.  We had a nice QSO.  Thanks Mike (video of our QSO above). I will try with Walter tomorrow.  

 

Thursday, January 12, 2023

On Ten Meters with a uBITX from the Eastern Tip of Hispaniola


On ten from HI7.  Cluster spots, DX, CW, and the Reverse Beacon Network. 

 

Sunday, January 1, 2023

Happy New Year and Straight Key Night from HI7/N2CQR


HNY from HI7!  In keeping with SolderSmoke tradition, I recorded the above greeting.  If you look over my right shoulder, or in the picture below, you can see the apartment building we will be moving into (at least for the winter months) later this year.  There will be a small shack on the top level.  And yes, a telescope.  


This morning I fired up the uBITX on 20 CW and made two Straight Key Night contacts.  My key is the straightest of the straight --  a homewbrew thing made from an old hack-saw blade,  copper tape, brass screws, scrap wood, and duct tape.  Picture below.  


73 to all!  HNY and good luck in 2023!  

Tuesday, October 11, 2022

SolderSmoke FOREVER! Archived in the WayBack Machine

 
There were recently some stories about an effort to put on the Internet Archive recordings and other material from the history of ham radio.  I am pleased to report that the SolderSmoke podcasts have been included in the new collection: 


They also archived the recordings of my contacts with the MIR space station (and other spacecraft) from the Dominican Republic in the mid 1990s: 


I have also suggested that they find a way to archive all of Jean Shepherd's recordings about ham radio. 

Thanks to Kay K6KJN for putting our material into the archive. 

Friday, September 16, 2022

Fixing Up An Old Homebrew Rig -- Barebones Superhet and VXO 6 Watter

 
I'm not exactly sure why I pulled this old rig off the shelf, but I'll write up what I did -- I often use this blog as a kind of notebook.  I can look back and easily see what I did on my last encounter with the rig. 

The receiver is Doug DeMaw's Barebones (aka Barbados) Superhet.  This was my first superhet receiver. I built in in 1997.   The transmitter was my first real homebrew project -- it is the VXO 6 watter from QRP classics.  I built it in the Dominican Republic, probably in 1993 or 1994.  I built the power supply so that I could say that the entire rig is homebrew. 

This rig is getting a bit long in the tooth:   The receiver is built with 40673 Dual-Gate MOSFETs, an some of the transistor cans have gotten rusty.  The frequency readout on the receiver is the top of a coffee can fitted onto the reduction drive behind the tuning knob from a Drake 2-B (not MY 2B!). 

Here are two 2013 videos that I did on this receiver: 

-- I put the crystal filter back in CW mode.  I had widened it so that I could listen to 20 meter SSB, but I decided to go back to its original configuration.  When I built the receiver in 1987, I didn't characterize the crystals -- I just used the capacitor values that Doug DeMaw had in his article.  I pretty much did that again this time, just putting caps that are close in value to what Doug had.  DeMaw used color burst crystals at 3.579 MHz.  So I guess this would be a GREAT receiver for the Color Burst Liberation Army!  

-- I used My Antuino (thanks Farhan!) to check the passband.  Here is what it looks like.  I just put the Antuino across the 10k resistors on either side of the input and output transformers.  The coil cores had become very loose -- I just tried put them in the right place.  I may need to put some wax in there to allow them to better stay in place. I think they could have used toroids instead -- that would have been easier. One of the transformer connections was open -- they don't work well that way,  once I fixed that, the passband looks like this: 


-- Each of the horizontal divisions is 500 Hz.  The passband is not pretty, but it is OK, and I  didn't feel like doing too much work on this to get it in better shape. 

-- The filter peak was a bit lower in frequency than expected.  I found that trimmer cap C3 in series with the BFO crystal would not allow me to lower its frequency sufficiently.  So I moved C3 to a position in parallel with the crystal.  With this mod, I could get the BFO frequency to 3578.69.  This produces a 690 Hz tone when the received signal is at the peak of the IF passband.  Opposite sideband rejection is quite good. 

March 2013 Rebuild of the VXO 6 watter

-- I didn't have to do any real work on the transmitter.  The RF amplifier in the transmitter had served for a time as the RF amp in by 17 meter DSB rig (I had added a bias circuit, which I removed when I put the amplifier back in Class C).  Some time ago I rebuilt the oscillator circuit (which had been literally cut off the board when I used the amplifier in the DSB rig). 

-- I did have to reconfigure the muting circuit -- the T/R switch in the transmitter switches the antenna and also -- through a two wire circuit -- cuts off 12 V DC to the transmitter when in receive mode. 

-- For sidetone I just put a small piezo buzzer through a 1k resistor between 12 V DC and the key line. 

It all worked fine -- I talked to three stations on the high end of  the 20 meter CW band. 

Friday, August 5, 2022

SolderSmoke Podcast #239: Hex DX, VFO Temp Comp, DC RX, Polyakov!, DX-100, Wireless Set, Farhan's "Daylight Again" HDR rig, MAILBAG

N2CQR Hex Beam Aimed at Europe

SolderSmoke #239 is available for download: 

http://soldersmoke.com/soldersmoke239.mp3

TRAVELOGUE: 

James Webb Space Telescope.  Mars returning to opposition in early December.   

BILL'S BENCH

Hex Beam K4KIO - on roof – TV Rotor – 20-17-12  Lots of fun.  Working Japan regularly, Australia, South Africa on long path 17,000 miles.  52 countries SSB since July 11.

VFOs and Temp stabilization.  Dean KK4DAS found my ceramic resonator VFO for DC receiver drifty. He was right.  So I built a real LC Colpitts VFO.  Got me into temp stabilization.  A new hobby!  An obsession.  HT-37 and Ht-32 parts. Ovens?  WU2D’s second VFO video.  Understanding thermal drift and how to address it. Split stator caps.  Cut and try.  

Built a Polyakov DC Receiver. https://soldersmoke.blogspot.com/2010/03/polyakov-plus-dual-band-receiver-with.html  Lauser Plus.  Lauser = Imp or Young Rascal!  DK2RS.  He used a ceramic Resonator VXO at 3.58 MHz.   Mine works great on 40 with VFO running 3.5 -- 3.65 MHz. See schematic below. 

On 40 AM with DX-100 and MMMRX.  DX-100 died.  12BY7 VFO buffer went bad.  How common is failure in this tube type?  Nice QSO with Tim WA1HLR about the DX-100.

Got my Dominican license:  HI7/N2CQR!  SSSS on the way.   Thanks to Radio Club Dominicano and INDOTEL.

Getting more active in the Vienna Wireless Society.  

BOOK REVIEW:  

"The History of the Universe in 21 Stars” by Giles Sparrow.  Written during the pandemic.  Published by Welbeck, in London. https://www.amazon.com/History-Universe-21-Stars-imposters/dp/1787394654  Also:  From “Atoms to Amperes” by F.A. Wilson available for download.  See blog.

SHAMELESS COMMERCE DIVISION:   

Todd K7TFC getting ready to launch “Mostly DIY RF.”   I used his TIA boards in my 1712 rig.  He will have boards like this and much more.  Stay tuned.

I need more viewers on YouTube.  They want 4,000 hours IN A CALENDAR YEAR!  Please watch!

FARHAN’S NEW “DAYLIGHT AGAIN” RIG.  Analog.  VFO.   Comments, observations. We need to get him on the podcast.  Maybe two shows: SDR and HDR. 

PETE'S BENCH

Time very limited. But still sharing lots of tribal wisdom.

Wireless set with tubes!

Tool recommendation – Air compressor

 MAILBAG:

Farhan VU2ESE – Speaking of big antennas “Whenever I look at the huge construction cranes in Hyderabad, I always think how one could make 160m, 4 element yagi using it as a boom..

Todd K7TFC in Spain, spotting Log Periodics in Madrid.

Andreas DL1AJG:  Can Biologists fix Radios?

Janis AB2RA Wireless Girl.  Expert on Hammarlunds.  And was my first contact with the Tuna Tin 2. She too was HB!

Peter Parker VK3YE on Owen Duffy VK1OD

Lex PH2LB on homebrew radio

Would this really be homebrew?  Mail from H-A-D article on FM receiver

F4IET a DSB rig from France

Ciprian got his ticket YO6DXE    

Josh G3MOT sent us a good video about the Vanguard satellite and IGY.

Dave Wilcox K8WPE bought Chuck Penson’s Heathkit book.

Rogier -- So many great articles and links from PA1ZZ

Bill AH6FC  Aloha. Retiring.  Wants to build.  Mahalo!

Grayson KJ7UM  Working on an Si5351.  Gasp.

Mike KE0TPE viewing YouTube while monitoring 6 meters.   He will have a lot of time to watch!

Chris KD4PBJ spotted Don KM4UDX from VWS FB

Mark WB8YMV building a superhet.  Having trouble with 455 kc IF can filter.

Walter KA4KXX Great comment on the Daylight Again rig. 

Ramakrishnan Now VU2JXN was VU3RDD.  Found lost Kindle with SolderSmoke book on it. Building SDR rig from junk box.  Trouble with the LM386. 

Pete, Farhan and Tony:  Shelves of Shame

Daylight Again by Farhan

The Polyakov receiver I built yesterday (from SPRAT 110, 2002!)

Friday, June 17, 2022

SolderSmoke Podcast #238 -- SolderSmoke Shack South, Cycle 25, Chiquita Banana Radio, RCA, HQ-100, Mate Mighty Midget, Sony SWL RX , Mailbag

SolderSmoke Podcast #238 is available:  http://soldersmoke.com/soldersmoke238.mp3

TRAVELOGUE:  

Cathartic decluttering:  Bill preparing for future winter travel to Dominican Republic.  Will build SolderSmoke Shack South.  Dividing everything up:  Rigs, parts, tools, supplies, antennas, test gear.  Everything.  

OUR SPONSOR:  Parts Candy.  
https://www.ebay.com/usr/partscandy  Premium quality test leads! Hand cut, hand crimped, hand soldered, these will become your new favorite test leads GUARANTEED!

PETE'S BENCH:

-- Cycle 25 better? – Out here on the left coast – it is not evident
-- Chiquita Banana and the US Navy in early ‘wireless” operations.  Why RCA was created by the US Navy in 1919.
-- Update on the MAX2870 –someone has written the code to make it work with the Raspberry Pi and the QUISK SDR software
-- Field Day prep

SHAMELESS COMMERCE DIVISION:
 
Bill needs your help:  
-- Please watch his YouTube videos.  The longer the better!  Success based on hours watched. Great to have on while you are working in the shack. Just go to YouTube and search for the SolderSmoke channel. Or:  SolderSmoke - YouTube
-- Please put links to the SolderSmoke blog on your websites and blogs. 
-- How to USE the SolderSmoke Blog: Propagation, shopping, other sites... 
-- Please put comments under the articles on the SolderSmoke blog.  We like comments and dialogue. 

BILL'S BENCH:

-- Repair of the Sony ICF SW1 shortwave receiver.  Bad electrolytics.  Number Station receiving device? 
-- HQ-100   Q-Multiplier. BFO Switch. AVC.  Noise Limiter limitations.  Dave K8WPE: Old Radio Lessons.
-- MMMRX: Detector circuit. Alignment. Muting. On the air (40 AM with DX-100) 

MAILBAG: 

-- Bob Crane W8SX -- Great interviews at FDIM. On the SolderSmoke Blog. Thanks Bob! 
-- Dave Bamford W2DAB -- Stickers on the Upper East Side of Manhattan.  FB Dave! 
-- Farhan VU2ESE:  LADPAC software now available through W7ZOI' site.  
-- Lex PH2LB: Stickers in a Netherlands pub.  
-- Dave K8WPE Michigan Mighty Mite links.  Old Smoke idea. On the SolderSmoke blog. 
-- Rich WB4TLM was in the electronics class of CF Rockey W9SCH. FB. 
-- Dean KK4DAS Working on  his dad's HQ-170A. VWS maker group on mixers. 
-- Grayson KJ7UM -- Mixology article in ER. 
-- Pete Eaton -- Farhan's new analog rig: Daylight again!  Standby for more info from Farhan. 
-- Will KI4POV New HB Al Fresco single conversion superhet.  FB. 
-- Alvin N5VZH. Shep's "I Libertine."  Yes.  I laughed, I cried,  It changed me. 
-- Chuck KF8TI.  Mr. Wizard!  
-- Steve N8NM on the mend after some routine maintenance. 
-- Ben AB4EN is listening and likes the podcast -- Thanks Ben. 

May 1939 QST


Tuesday, May 17, 2022

Troubleshooting and Fixing Old Faults in my Long-Suffering Hammarlund HQ-100 (Part 2) (video)


Work continues on my old Hammarlund HQ-100. I give background on the rig and explain the electrical trauma it likely suffered. Following Dave K8WPE's dictum that we can still learn a lot from old receivers, I dug into this one. I wanted to fix a long-standing S-Meter/AVC problem. This led me to an interesting troubleshoot, with at least one "waste of time" detour. Eventually I found the fault in one of the coils in the grid circuit of the RF amplifier. The coils had been smoked years ago, perhaps by a lightning strike. I came perilously close to permanently losing 10-30 MHz. But I figured out how to fix the smoked coil. So my S-Meter/AVC problem was fixed. I really like listening to this thing. There is still a lot of nice material on the SW bands. There are some very nice broadcasts in Spanish. Please subscribe to my YouTube channel.

You can see where the coil burned. Wire remained intact, but the insulation burned creating a Primary to Secondary connection.

I just very carefully lifted one of the coils way from the other, eliminating the unwanted connection.

Here's my homebrew "RC Printed Network" Z2 module. This was unnecessary -- the original was good. I put the original back in.


Electric Radio magazine recently ran a two part series on the HQ-100. I have ordered these issues of the magazine.

Monday, April 4, 2022

The Next Time You Hear Someone Complaining About Winding Toroids....


... send them this video. 

Lin is in Hong Kong. What a great job she does with very simple tools.  Notice how she casually mentions that for those parts that have been lost, she will make them herself.  Three cheers for Lin! 

This video reminded me of the people in Santo Domingo 25 years ago who rewound the transformers and RF chokes from my HT-37.  These parts still work.  

Chuck KF8TI recently told me that when he was a Peace Corps Volunteer in the Philippines (1965-1967) he visited a transformer re-winding shop there, seeing piles of insulation and wire on the floor.  Apparently business was good!  

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column