Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Clubs. Show all posts
Showing posts with label Clubs. Show all posts

Saturday, September 24, 2022

Talking about Homebrew Radio with the Williamsburg Virginia Radio Club


It was very nice to talk to Dino KL0S and the Williamsburg area radio club.  Thanks Dino! 

Friday, August 5, 2022

SolderSmoke Podcast #239: Hex DX, VFO Temp Comp, DC RX, Polyakov!, DX-100, Wireless Set, Farhan's "Daylight Again" HDR rig, MAILBAG

N2CQR Hex Beam Aimed at Europe

SolderSmoke #239 is available for download: 

http://soldersmoke.com/soldersmoke239.mp3

TRAVELOGUE: 

James Webb Space Telescope.  Mars returning to opposition in early December.   

BILL'S BENCH

Hex Beam K4KIO - on roof – TV Rotor – 20-17-12  Lots of fun.  Working Japan regularly, Australia, South Africa on long path 17,000 miles.  52 countries SSB since July 11.

VFOs and Temp stabilization.  Dean KK4DAS found my ceramic resonator VFO for DC receiver drifty. He was right.  So I built a real LC Colpitts VFO.  Got me into temp stabilization.  A new hobby!  An obsession.  HT-37 and Ht-32 parts. Ovens?  WU2D’s second VFO video.  Understanding thermal drift and how to address it. Split stator caps.  Cut and try.  

Built a Polyakov DC Receiver. https://soldersmoke.blogspot.com/2010/03/polyakov-plus-dual-band-receiver-with.html  Lauser Plus.  Lauser = Imp or Young Rascal!  DK2RS.  He used a ceramic Resonator VXO at 3.58 MHz.   Mine works great on 40 with VFO running 3.5 -- 3.65 MHz. See schematic below. 

On 40 AM with DX-100 and MMMRX.  DX-100 died.  12BY7 VFO buffer went bad.  How common is failure in this tube type?  Nice QSO with Tim WA1HLR about the DX-100.

Got my Dominican license:  HI7/N2CQR!  SSSS on the way.   Thanks to Radio Club Dominicano and INDOTEL.

Getting more active in the Vienna Wireless Society.  

BOOK REVIEW:  

"The History of the Universe in 21 Stars” by Giles Sparrow.  Written during the pandemic.  Published by Welbeck, in London. https://www.amazon.com/History-Universe-21-Stars-imposters/dp/1787394654  Also:  From “Atoms to Amperes” by F.A. Wilson available for download.  See blog.

SHAMELESS COMMERCE DIVISION:   

Todd K7TFC getting ready to launch “Mostly DIY RF.”   I used his TIA boards in my 1712 rig.  He will have boards like this and much more.  Stay tuned.

I need more viewers on YouTube.  They want 4,000 hours IN A CALENDAR YEAR!  Please watch!

FARHAN’S NEW “DAYLIGHT AGAIN” RIG.  Analog.  VFO.   Comments, observations. We need to get him on the podcast.  Maybe two shows: SDR and HDR. 

PETE'S BENCH

Time very limited. But still sharing lots of tribal wisdom.

Wireless set with tubes!

Tool recommendation – Air compressor

 MAILBAG:

Farhan VU2ESE – Speaking of big antennas “Whenever I look at the huge construction cranes in Hyderabad, I always think how one could make 160m, 4 element yagi using it as a boom..

Todd K7TFC in Spain, spotting Log Periodics in Madrid.

Andreas DL1AJG:  Can Biologists fix Radios?

Janis AB2RA Wireless Girl.  Expert on Hammarlunds.  And was my first contact with the Tuna Tin 2. She too was HB!

Peter Parker VK3YE on Owen Duffy VK1OD

Lex PH2LB on homebrew radio

Would this really be homebrew?  Mail from H-A-D article on FM receiver

F4IET a DSB rig from France

Ciprian got his ticket YO6DXE    

Josh G3MOT sent us a good video about the Vanguard satellite and IGY.

Dave Wilcox K8WPE bought Chuck Penson’s Heathkit book.

Rogier -- So many great articles and links from PA1ZZ

Bill AH6FC  Aloha. Retiring.  Wants to build.  Mahalo!

Grayson KJ7UM  Working on an Si5351.  Gasp.

Mike KE0TPE viewing YouTube while monitoring 6 meters.   He will have a lot of time to watch!

Chris KD4PBJ spotted Don KM4UDX from VWS FB

Mark WB8YMV building a superhet.  Having trouble with 455 kc IF can filter.

Walter KA4KXX Great comment on the Daylight Again rig. 

Ramakrishnan Now VU2JXN was VU3RDD.  Found lost Kindle with SolderSmoke book on it. Building SDR rig from junk box.  Trouble with the LM386. 

Pete, Farhan and Tony:  Shelves of Shame

Daylight Again by Farhan

The Polyakov receiver I built yesterday (from SPRAT 110, 2002!)

Friday, February 11, 2022

Bill Talking about Homebrew Radio with L’Anse Creuse Amateur Radio Club (Michigan) -- February 2, 2022 (Video)


This was a very nice meeting.  We just talked homebrewing and why it is such an important part of ham radio.  Video above

Topics included:

-- Jean Shepherd
-- Being "Electrically Inclined" 
-- The Herring Aid 5
-- Radio Clubs around the world
-- The Shame Shelf
-- Making mistakes, releasing smoke
-- Errors in ham radio magazines and schematics
-- The importance of understanding the circuit
-- The Michigan Mighty Mite
-- Building a power supply for the HW-32A
-- The origins of the SolderSmoke podcast
-- Knack stories, the IBEW and what we all have in common
-- The importance of books

Thanks to The L'Anse Creuse ARC for the invitation. 

Friday, December 10, 2021

The Lamakaan Annual Radio Convention Starts Today!

 


The Lamakaan Amateur Radio Club's annual convention begins today in Hyderabad, India.  This is Farhan's club so it is sure to be a great event.  Presentations are being live streamed on YouTube and on the QO100 geostationary satellite. 

Here is the link to the convention: http://www.larc.in/larc4/

Pete N6QW will be the first presenter and will talk about his new PSSST Rig. He will be speaking at 0430 UTC Saturday 11 December.  That is 11:30 pm on Friday, December 10 on the East Coast of North America.  

I will be speaking at 1130 UTC on Sunday December 12.  That is 0630 Saturday 11 December EST. I'll be talking about the Mythbuster rig and about the ET-2. 

Here is the schedule.  




Here's a time zone converter: https://www.timeanddate.com/worldclock/converter.html?iso=20211211T043000&p1=505&p2=250&p3=137

Here is the Lamakaan Club's YouTube Live Channel.  https://www.youtube.com/watch?v=cRznKwGgvDo

I don't know how we might be able to watch or listen via the QO100 satellite.  The U.S. is not in the footprint of this bird.  But there is a good WEBSDR receiver run by BATC and AMSAT DL: https://eshail.batc.org.uk/

Wednesday, September 29, 2021

N2CQR (WN2QHL) Novice Station Re-Created

 
There it is.  The 2021 re-creation of the WN2QHL Novice Amateur Radio Station.  This is what I had when I first went on the air in April 1973 from Congers, NY. 

-- I got my first Lafayette receiver (WITH JEWELED MOVEMENTS!) for Christmas in 1972.  My mom drove all the way into New Jersey to get it for me. 

-- I bought my first DX-40 and the Globe VFO Deluxe from someone in the Crystal Radio Club.

For this re-creation station: 

-- I got this recently acquired Lafayette free-for-pickup from a very kind SWL in the Shenandoah valley.  (I've discussed this receiver extensively here.) 

-- The DX-40 is the result of a couple of junkers that I bought in a hamfest some 23 or 24 years ago.  It might have been the Timonium Hamfest.  I cannabalized one of them and made one good DX-40 out of the two.  Parts of the cannabalized unit carry on the good fight as pieces of my balanced  antenna tuner (the coils were useful there) and as the chassis for my first SSB transmitter. 

-- The Globe VFO Deluxe was harder to recover.  There are just not a lot of these things around.  I actually put up a plea for one of these on the SolderSmoke blog.  Not even the IBEW could come up with one of these things.  But then, last week on Facebook I came across a fellow who was selling one.  Deal!  Check our the nice Juliano Blue light indicating 40 meter operation. 

Putting these three devices together was more challenging than I thought.  To get them to work together decently three different things had to happen as the result of throwing one switch: 

1) Antenna had to switch from receiver to transmitter. 
2) Receiver had to be largely muted (leaving some key-down signal for sidetone).  
3) VFO had to be turned on (I left it running and just keyed the DX-40).  

Fortunately I have almost 50 years more experience than I did when I first set this station up.  So I was able to do this better in 2020 than I did in 1973.   I had a 3PDT relay that I had built for a DX-60 station.  I was able to use it to do all three things described above. 

Muting the Lafayette was a bit tricky.  On the back octal connector they have two post  (1 and 3) that are normally connected.  Disconnecting 1 from 3 completely mutes the receiver by cutting off a needed ground connection to the RF amplifier and to an IF amplifier.  The Lafayette manual tells you to connect these terminals to the "muting voltage" presented by your transmitter.  The DX-40 doesn't have such a voltage, and I was reluctant to connect any voltage to this terminal for fear of blowing up the RF and IF amplifiers.  I figured that just putting a big resistor across 1 and 3 would mostly mute the receiver.  The 3PDT relay shorts this resistor on receive, un-muting the receiver. I use a 500,000 ohm resistor.  It works well, but the sidetone is chirpy while the actual signal is not.  This is a bit annoying. 

I re-capped the DX-40 when I got it back in the late 90's.  Those caps are still good. 

The Globe VFO had also been recapped.  But it still has selenium rectifiers in there.  I will change them ASAP.  Also, the Globe VFO had a somewhat mysterious second transformer in there.  I wondered what that was.  I measured the output:  6.3 V.  That is a filament transformer.  My guess is that the filament winding in the main transformer went open, maybe as a tube failed. Instead of replacing the whole transformer, they just popped in a replacement filament transformer.  That's fine. 

I've been on the air with this rig, mostly on 40, as I was as a Novice.   I can work anyone I hear on 40 meter CW and my CQ's are heard in Europe (as shown by the RBN). 

I'm struck by how physically BIG these pieces of gear are.  Much bigger than our beloved BITXs. 

Regarding T/R switching:   There was a line in the 1973 ARRL Radio Amateurs Handbook that really got to me back in 1973:  Page 640, in the chapter entitled "Assembling A Station:" "

"In any amateur station worthy of the name, it should be necessary to throw no more than one switch to go from the 'receive' to the 'transmit' condition." 

By this standard, my station was probably unworthy of the name.  I don't remember how I handled T/R changeover, VFO keying, receiver muting and sidetone,  but it almost certainly involved throwing more than one switch.  But now, I am happy to report, my novice station is finally up to the ARRL's high standards.  As Pete says, "When you know stuff you can do stuff." 

Tuesday, September 28, 2021

The World Friendship Society of Radio Amateurs

Rod Newkirk, W9BRD wrote the "How's DX?" column of QST magazine from 1947 to 1978.  He had a wonderful writing style.  His column was an inspiration for many of us -- I write about the impact it had on me in my book SolderSmoke -- Global Adventures in Wireless Electronics and here on the SolderSmoke blog

Rod's son David Newkirk is radio wizard himself and has produced many great articles for QST and other publications.  His dad is a Silent Key and David has taken his call.  

This morning I was looking at an article on David's web site in which he looks at some of his dad's old QSL cards.  Most of the affiliations on the cards (ARRL etc.) are easily recognizable, but there was one that was unclear:  WFSRA.  

David figured out what it was: 

--------------------------------------

A W9BRD Affiliation Mystery Solved

My father's pre-World-War-Two QSL cards include the usual list of affiliations: ORS (Official Relay Station), RCC (Rag Chewer's Club), WAC (Worked All Continents), A-1 Op (A-1 Operator's Club). One affiliation, WFSRA, remained mysterious. A clue in the correspondence column in March 1938 QST pointed me to an "I. A. R. U. News" item on page 74 of July 1935 QST, and I had my answer:

W.F.S.R.A.:
    The World Friendship Society of Radio Amateurs has requested publication of the following pledge, which is the sole obligation for membership in the Society:
    "I hereby promise that I will, to the best of my ability, make such use of my amateur radio station as will be conducive to international friendships; that I will never voluntarily permit by station to be used as the tool of selfish nationalistic interests; and that I will do what I can, as a radio amateur and as an individual, to promote world peace and understanding. (To be followed by the signature, address and station call.)"
    Membership in the Society is open to all amateurs in all countries. All that is necessary to become a member is to copy and sign the pledge, and send it to the secretary, Duane Magill, W9DQD, 730 N. 6th St, Grand Junction, Colorado, U.S.A. Copies are preferably to be made in English or French, but may be made in the language of the member."

----------------------------------- 

The WFSRA was apparently one of the many, many peace organizations that were born in the interwar period in response to the carnage of WWI.  In addition to the QST correspondence mentioned by David, Google shows WFSRA in many articles in UK ham and SWL publications, and  there is one mention of it in the May 1954 edition of Boy's Life magazine.    

Much as the CBLA seems to have been presaged by the FMLA, the IBEW seems to have much in common with the WFSRA. 

Friday, September 24, 2021

Video: N2CQR Talks About Homebrew SSB with The Vienna Wireless Society's Makers Group


It must have been great to have been a ham during the heyday of homebrew gear.  Imagine walking into your local club and finding a dozen or so people who share your passion for melting solder and homebrewing your own equipment.  Well, I got a taste of that thanks to the Vienna Wireless Society's Makers Group.  Led by Dean KK4DAS, this group of intrepid radio amateurs has built versions of Pete Juliano's Simple SSB transceiver.  They are finalizing the rigs; many are already finished.  And I could tell from the questions and the discussion that I was talking to a bunch of guys who knew which end of the soldering iron to grab.  It was really wonderful to talk to people who had gone through the experience of building an SSB transceiver, who knew from personal experience that it is not as easy as it seems. And I could tell from the questions that many of these guys are already thinking of their next projects, of how to put to use the experience they gained building Pete's SSB rig. 

Dean asked me to talk to the group about my recently completed "Mythbuster" rig.  This was a good topic for the group because my rig is similar enough to the Simple SSB that they could relate to it, but different enough that it could give them ideas about how they might do things differently next time. 

I really enjoyed this session.  I'm glad that VWS captured it on video.  I think SolderSmoke listeners and readers will like watching this video.  

Thanks to Dean KK4DAS and the VWS Makers group for hosting me.  And thanks to Jacek KW4EP for helping with the video. 

Here is the Vienna Wireless Society's YouTube Channel: 

Sunday, September 12, 2021

Simple SSB Success in Northern Virginia -- "The Radio Does Not Build Itself...."


Dean KK4DAS and the Vienna Wireless Society (VWS) Builders Group have had some remarkable success with Pete Juliano's Simple SSB design.  Sixteen of the rigs have reached the point where the receivers are fully functional.  Eight more have gone the final (!) stretch and have the full transceivers working.  This week Dean and two other VWS builders met up on 40 meters for the world's first multi-SSSB QSO (see Dean's video in the link below). 

https://kk4das.blogspot.com/2021/09/simplessb-three-way-qso.html

Here's Dean's presentation to the club describing the project and Pete's rig: 

https://docs.google.com/presentation/d/1eUFEO3mZNrwdwaZnyPzr5G6ooozxFoU7/edit?usp=sharing&ouid=100787991139259592659&rtpof=true&sd=true

As Pete says, "The radio does not build itself..."   Indeed it doesn't!  The VWS builders made these rigs.   FB! 


Monday, May 17, 2021

Bill N2CQR Talks to Dean KK4DAS about the Simple SSB Group Build


Dean KK4DAS visited the N2CQR SolderSmoke shack.  We talked about a lot things including chess, Mars, and AI.  Dean is an amazing guy -- he used to work at NASA's Jet Propulsion Laboratory and a couple of times  actually spoke with Richard Feynman. We also shot a video about the Vienna Wireless Society's group build of Pete Juliano's Simple SSB transceiver (video above).  

This group build all started with Dean's build of Pete's rig.  He built his early in the pandemic, while on furlough from work,  thus the name "The Furlough 40." That makes all of this very much a quarantine effort. As we have learned, dark clouds often do have silver linings. 

For more details on the group build, check out Dean's blog:
https://kk4das.blogspot.com/

And here is the Vienna Wireless Society's Group Build page: 

Thanks Dean!  And three cheers for all the Vienna Wireless builders!

Friday, April 16, 2021

Homebrew Lives! TWENTY N6QW Simple SSB Transceivers Under Construction in Northern Virginia

IF strip by Don KM4UDX

This has to be one of the most successful of SSB group-build projects.  Dean KK4DAS has been leading 20 members of the Vienna Wireless Society in the construction of N6QW's Simple SSB Transceiver, with Dean's "Furlough 40" additions.  This is very FB, and very encouraging.  Dean clearly has The Knack.  Just two winters ago I was smuggling a 3.579 MHz crystal to Dean for use in a Michigan Mighty Mite.  He has clearly made a lot of progress.  
-------------------------
Dean writes: 
It has been just over a year since I completed my initial build of the Furlough 40 with much coaching and assistance from Pete. Mike and Don are two out of 20  members of the Vienna Wireless Society Makers group that is working on a group build the SimpleSSB project as enhanced by me to include features like CAT control for digital modes.  Beginning about six weeks ago the group is progressing module by module per SolderSmoke best practice advice.  We started with the audio amplifier, followed that with the Arduino/SI-5351 based controller module and the builders are just completing the IF module.  This week at our weekly meeting, Mike proudly showed off his success.  

-------------------------

Read all about it, and see some really great videos here:  


Leon NT8D's Front Panel


Tuesday, January 12, 2021

Pete N6QW and Steve G0FUW Talk to RSGB About Homebrew (Video)


Wow, what an unexpected treat!  Here we can watch Pete N6QW and Steve G0FUW talk to the Radio Society of Great Britain about homebrew radio.  Steve talks about kits and scratch-built rigs.  I really liked seeing his early rigs and his description of how building these rigs helped him become a more advanced homebrewer.  I also liked his mention of George Dobbs as a guiding light in the QRP and homebrew world. 

Pete focuses on SDR and provides a really great description of this approach to homebrew.  I was struck with how great it is that, after a lifetime of HDR building, Pete is willing to embrace this new technology. He talks about it as part of "a learning journey."  As always, he sets the example for us all.   

Thanks to Pete, Steve, and RSGB. 

Saturday, June 27, 2020

SolderSmoke Podcast #223 Field Day, Club Talks, Patreon, NanoVNA, Farhan Video, SPRAT, BIG MAILBAG



SolderSmoke Podcast 223 is available: 


27 June 2020

Quarantine Field Day!   
Ironically, THIS YEAR we are both participating
Pete's FD Plan, Bill's FD plan 

Talking to Clubs: 
Pete's talk to the Cedar Valley Iowa Club
Bill's talk to the Vienna Wireless Society

Pete's Bench
DDC SDR
Ideas from the Summer SPRAT
Mean Well Voltage Regulator

SHAMELESS COMMERCE DIVISION: PATREON.   SS is an  SV DELOS WANA-BE!
We got our very first Patreon Patron!  Jonathan Magee from the UK!  Upper Left on the blog.
Continue to use our site for your Amazon purchases. 

Bill's Bench
NanoVNA
Understanding L Networks
+/- 6kHz Ceramic filter for Q-31
Lobes, Nulls and WSPR

Miscellaneous: 
Farhan's feedback Amplifier Video
British Antarctic Broadcast heard (sort of)

MAILBAG:
Mauro VA6BRO liked the SolderSmoke book.  Thanks Mauro
Tryg in Galway Ireland is listening.  Hope to get you the signed books Tryg. 
Michael N4MJR suggested that I use N2 Corona Quarantine Radio as my phonetics.  I dunno... 
Ed DD5LP has been helping us get SS rebroadcast on a German SW broadcast station. Stay tuned! 
Rogier PA1ZZ in California sent an e-mail about the Don Lee Broadcast System.  Thanks Rogier!
Rick KE3IJ  Silver Skirt on his 2B also. W3GOO did it.  Rick traded his Commodore 64 for the 2B.  Yea! 
Walter KA4KXX has a simplified circuit for the MMM!  From UK
Peter VE1BZI thank us for the tribal knowledge.  Dipolo Crilolo
Peter VK2EMU Wee need someone to make the Constructor Crusader badge. 
Scott KA9P sent us the Amateur Wireless cover from 1934 with the Constructor Crusader thing. 
John GM4OOU Built lockdown rig.  we want pictures! 
Jerry KI4IO  His version of the Sproutie by AA7EE   FB 
Adam N0ZIB built a MMM
Wouter ZS1KE in South Africa -- comparing notes on Drake 2-Bs
Randall KD5RC wants to get started in HB. 



Sunday, June 14, 2020

Dilbert, Shep, Dex, Pete, Farhan, and Wes! N2CQR Presentation on Homebrewing to Local Radio Club



Dean KK4DAS asked me to speak to our local radio club, the Vienna Wireless Society.   It was a lot of fun.  I talked about my evolution as a homebrewer, some of the rigs I made, the moments of joy, and the tales of woe.   You can watch the presentation in the video above. 

I was really glad to be able to explain in the presentation the importance of people like Pete, Dex, Farhan, Wes, Shep and even Dilbert. 

I was also pleased to get into the presentation the N2CQR sign that Peter VK2EMU made for me.  Thanks Peter! 

Here is the URL to the YouTube video (also above): 
https://www.youtube.com/watch?time_continue=3414&v=VHSr-v4QO7Q&feature=emb_logo

And here are the PowerPoint slides I used: 
https://viennawireless.net/wp/wp-content/uploads/2020/06/VWS-presentation-Rig-here-is-homebrew.pdf

Wednesday, February 19, 2020

Hi-Per-Mite Active Audio CW Filter Installed in uBITX (video)



Coming home from the Dominican Republic, this was a major item on my list of desired mods for the uBITX: a narrower passband for CW.  Using the 2.3 kHz SSB passband, you could have many CW QSOs audible in your headphones.  Narrow that passband to 200-300 Hz and life gets a lot easier. 

Farhan had discussed adding a 12 Mhz IF filter of suitable CW bandwidth, but this seemed difficult to me. Besides, I have long wanted to use an active audio filter for this purpose. 

The Hi-Per-Mite filter from 4 State QRP Group is just what I needed. I built the kit without problems in about an hour, then I put it in the uBITX box, with  switch on the front panel that lets me put it in the circuit or take it out -- this is very satisfying and a lot of fun.  

The Hi-Per-Mite just goes between the uBITX audio out and the speaker/headphone connection. I built mine for "no gain" -- the uBITX provides plenty of audio. 

The selectivity with the Hi-Per-Mite compares favorably to that of my Drake 2-B with the 500 Hz LC filter.  You can get an idea of the performance in the video. 

Three cheers for the 4 State QRP Group and their Hi-Per-Mite!  Here is the page with all the info: 

http://www.4sqrp.com/hipermite.php


Sunday, September 29, 2019

W4AMV's Beautiful Receiver


Hi Guys,

We had our Knightlites annual BBQ this past Saturday. I wanted to share one of the radios from one of my Elmer's, Alan Victor W4AMV.
Pictured is him standing beside the preselector and receiver.
I hadn't ever heard a Collins mechanical filter vs Murata crystal filter side by side. The Collins was amazing. Single signal extracted from the band. The rig is line powered with a built in power supply.
There is a note (pictured) that has some specs.
Alan's work is to be savored, true analog engineering at its best. I wanted to share it with you.

Chris
KD4PBJ



-------------------------------------

FROM W4AMV'S QRZ.COM PAGE:


Here is a receiver that started out as a regen for the grandkids to copy code.
Digging through the junk box un convered parts that I forgot I had. Included a wide and narrow band set of filters. So, the unit wound up as a single conversion superhet. A fun radio to build as well to listen. The wide band filter provides super fidelity on sideband as well uncovers plenty of CW signals within a 10 kHz bandwith of the tuned frequency. A switch to either a 800 Hz audio filter or a 500 Hz CW filter permits focus on a single signal. I was going to package the whole unit, however I was prompted to leave it OPEN to show what makes it tick! 
Left side front is the RF preselector, mixer and pre amplifier with RF gain control. The rear double deck card is the IF and selectable wide and narrow band filters. The IF and pin diode IF gain control is bottom deck. The HF VFO is center stage with a 6:1 gear reduction. Right rear is power supply and voltage regulators. The active product detector and a BFO is just to the front of the power supply. The BFO is able to tune product detector output over a full 10 kHz of the IF. And finally the audio filter and 5 watt power amplifier. There is no AGC. Instead it is FUN to control every aspect of  gain control of the receiver; RF, IF and audio. Its a fun receiver to operate, dedicated to 40 meters and hopefully will spark the kids! 
Going forward a receiveing station is setup to copy code. Although a nice long high wire would be proper, I settled on something a little more compact. A 40 meter small loop, 2 turns, about 18 inches on a side is connected to the preselector thru a pickup wire. This arrangement works quite well. W1AW will knock the speaker off the desk if your not careful. However, rotation of the loop to the E-W knocks down W1AW to a whisper. The pix shows the little 25 W infinity speaker in a 8x8x8 inch cardboard box, works well and the single conversion receiver sporting a new front plexiglass panel is illuminated for evening tuning. 


------------------------------------------------










Loop antenna used with the receiver



Friday, June 9, 2017

FDIM: Bob Crane Interview with Preston Douglas WJ2V

WJ2V with Chuck Adams and Zack Lau
Our ace journalist in Dayton Ohio caught up with QRPARCI President Preston Douglas, WJ2V. 

Congratulations to Preston and QRPARCI for a successful FDIM event. 

Pete and I will heed his warning! 

Listen to the interview here:

http://soldersmoke.com/FDIM17WJ2V.mp3

Thanks Bob! Thanks Preston!

Friday, April 28, 2017

An Old but Cool DiFX: The Epiphyte



I've been hearing about this rig for many years.   It first appeared in the September 1994 issue of QRPp, the journal of the NORCAL QRP club. A condensed version of that article appeared in SPRAT 81 (Winter 94-95). The designer is Derry Spittle VE7QK from Vancouver, British Columbia.

The name always puzzled me.  Here is the explanation:  It started with the Neophyte: A very simple direct conversion receiver that many of us built.  The Neophyte was mostly an NE602 and an LM386.  In the Epiphyte, a crystal filter and a second NE602 were added, turning the Neophytes into a superhet receiver and -- with some additional circuitry -- an SSB transceiver.  The Oxford English Dictionary reportedly defines an Epiphyte as "a plant that grows on another plant"(see picture below).   The Epiphyte grew out of the Neophyte.

And this plant grew in British Columbia, which seems -- like Australia and New Zealand -- to be fertile ground for simple phone rigs.  I'm pretty sure the "Wee Willy" DSB rig also came out of BC, and it may have had a similar purpose:   allowing for portable contact with the BC Public Service Net on 75 Meters.  

There are many features of the Epiphyte that I like:  There is a simple 455 kHz filter and a ceramic resonator BFO/Carrier oscillator. The original design featured a VXO-like circuit using a ceramic resonator at 4.19 MHz.  And it ran off AA batteries (as did the NE602 DSB rig I took to the Dominican Republic).

Unlike my NE602 rig, the Epiphyte made an artful use of the fact that NE602's can be set up to have TWO inputs and TWO outputs.  Where I used DPDT relays to switch inputs and outputs from both NE602s,  OM Spittle left all the inputs and outputs connected, and simply switched the VFO and BFO signals.  Ingenious.  

There were updates and improvements.  The Epiphyte 2 and 3 featured increased power out (5 watts vs. 1 Watt).  Version 3 has an IRF-510 in the final, driven by a CA3020A chip.  That chip is capable of 70 db gain.  Wow. 

In 1996 NORCAL and G-QRP donated 50 EP-2 kits to radio amateurs in third world countries. Very nice.

In 2000 NORCAL did a kit of the EP-3 -- it sold out in 24 hours.  Here is a nice article on the EP-3:
http://www.norcalqrp.org/files/Epiphyte3Mnl.pdf

And above we have a video from Japan of an EP-3 in action.



Tuesday, April 18, 2017

Pete Juliano's Expulsion from the QRP Hall of Fame


First, I'd like to thank the many, many radio amateurs who sent in e-mails demanding that our friend Pete Juliano stay in the QRP Hall of Fame.  Their outrage at his expulsion was palpable.  They were angry and fired up.  Many compared Pete Juliano to baseball great  Pete Rose (who also got expelled from a Hall of Fame).   They wrote to us from all around the globe.  Several saw the action against Pete as yet another example of the deep divisions that are affecting modern society -- several saw it as being connected to our recent Presidential election, and/or BREXIT. 

Some writers took a diplomatic approach and tried to suggest ways that this ugly conflict might be ended -- one fellow suggested that Pete try to redeem himself by agreeing to enter some kind of QRP 12 Step Program.  Others got legalistically combative and said we should just "lawyer-up."

A number of our correspondents took note of the seasonal nature of these kinds of events. Who can forget the April  move a few years back by the New Jersey State Legislature to ban the use of soldering irons in the home?   "This kind of thing always seems to happen in the Spring-time!" said one irate Juliano surrogate,  "It is like Shakespeare wrote:  'Beware the Ides of March' -- only two weeks later!" Another ham also spotted the seasonal nature of these stories and quoted from T.S. Elliott's poem "The Wasteland":  "April is the cruelest month, especially the first day!"

We must point out that not all those who wrote were opposed to Pete's expulsion -- one writer said, "It is about time that that Pete "KW" Juliano got what he deserved! Good riddance!" (We have sent this e-mail to one of Pete's Italian-American relatives in New Jersey for, uh, action.)

Several of those who wrote in support of Pete are prominent members of the amateur radio community (they will -- if they follow our instructions -- remain anonymous.)

One activist supporter said that Pete's expulsion should lead to a street protest movement called "Pete's Award Matters" and that the chant at demonstrations could be "NO JULIANO, NO PEACE!"  Kind of catchy don't you think?

Anyway, we sincerely hope you have ALL figured out what was going on here. For those who have not, and for all those who wrote in, let me complete the tradition by saying it: "April Fool!"   

We'd like to thank all who participated in this long-standing amateur radio tradition.  Special thanks to Preston Douglas and the QRP-ARCI for putting up with all this.  (Tony Fishpool told us that he knew this couldn't be real, because someone as nice as Preston Douglas would NEVER expel anyone.)     

Saturday, April 1, 2017

SolderSmoke Podcast #195: (We need some help!) BITX, 60, SSB History, Tribal Socketry

SENDING IT BACK

SolderSmoke Podcast #195 is available.  Link appears below (scroll down)

We’ve got a problem:   Pete Juliano and the QRP Hall of Fame  :-(  PLEASE HELP!

BENCH REPORTS
Pete Releases Smoke (wiring harness)
Pete's DifX on 60
Architecture and Dual Conversion (uBITX:   uses ALL THREE clocks on the Si5351)
The Big Kahuna
ON HACKADAY with Philco SB100 SEE!  QRP!!!!!

BITX60
Cap Stack Hack mod (with leads)
Let the smoke out of an Si5351 (shorted output) Several actually.
(Same day delivery zone for Amazon -- but no drones or parachutes yet.)
Installed scanning switch
Observations on 60.  All the weird bands have a 6 in them: 160, 60, 6
The good:  100 watt limit, wire antennas 
The bad:  Kind of cliquish-- like 75, not much of a CQ band.  Channels.  Not much activity.
Met Josh KE8CPD on 40.  BITX 40!

TRIBAL KNOWLEDGE:
Socketry:  How to keep BNC jacks from spinning loose?
Do you heat shrink?

Feel Tech Sig Gen might not have blocking cap at the output.
Speaking of which, when I spoke of the Ne602, I mostly meant blocking caps, not bypass caps.

How come they don't have a cable TV channel devoted to radios?  They have HGTV? Why not HBTV?

REPORT FROM WINTERFEST
Bad weather.  Tailgaters wimped out!
Combined forces with Armand WA1UQO.
Met up with Charles AI4OT.
Acquisitions:  1/4 phono jacks, carbon mic, vero board, disc caps, weather radio,
LARGE collection of Electric Radios from Armand.  Wow.

Electric Radio notes:   1st Fifty Years of Sideband 1991 articles by Jim Musgrove K5BZH
Why LSB on 75? -- so AMers couldn't follow to top of band
W2, W6, W8s liked phasing, W3, W4, W0 more into filter rigs.
Early SSB guys turning on carrier and talking AM hams into SSB RX.
Kelvinator Refrigerator rigs.
A reading on the homebrewing of SSB rigs.

Tony Fishpool on QSO Today!  Pete mentioned prominently.
Good Hacks from ND6T on BITXHacks,   Stockton Bridge

MAILBAG

LINK:  http://soldersmoke.com/soldersmoke195.mp3
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column