Podcasting since 2005! Listen to Latest SolderSmoke

Monday, April 20, 2015

Progress! Si5351 VFO/BFO Working

 
I got the Si5351 portion of the new rig going today.  I used an Arduino program from Thomas LA3PNA.  It is relatively barebones, without a lot of bells and whistles, but it does just what I need:   it puts out a fixed BFO frequency and a variable VFO frequency, and displays the resulting transmit frequency.   Thanks Thomas, and thanks to Jason, NT7S, for his work on the Arduino libraries that make this all possible.
 

 
It is very simple:  Just an Arduino Uno with the Si5351 board sitting above it on a proto board that Pete sent me (thanks Pete!).  You can see the rotary encoder on the panel, and the 10K pot to set the brightness of the back-lit display.   I put the Arduino USB port on the front to make it easier to update the software, change the BFO freq. etc.    I'm going to use another cigar box wooden box for this projects, so the VFO/BFO front panel board was sized with that box in mind.  
 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

No comments:

Post a Comment

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column