I wasn't quite satisfied with the long-term stability of my VFO. It seemed like it was drifting about 70 Hz per hour, even after the initial warm-up period. So, all out of Q-Dope, I went to the local pharmacy in search of clear nail-polish. (My family was making fun of me.) I got home and applied several coats of "Sally Hansen No Chip Top Coat Vernis de Protection." I let it dry a bit, then started watching the frequency counter. At first results were disappointing. Drift continued. Now it seemed to be drifting up! I cracked the books. EMRFD has a good chapter on temperature compensation of VFOs, but the process seemed painful. I wasn't looking forward to it.
I left the VFO on when I went to work, noting the freq as I departed. Ten hours later I returned, and was delighted to find the frequency almost exactly where I left it! It may have taken a while for the nail polish to completely dry. I'll leave it running again today to see how it does.
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"
Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke
Our Book Store: http://astore.amazon.com/contracross-20
Tube Radios • Re: Super Duper 3-Tuber - would involve 13 Fahnestock clips. . .Or. . .13 / 6-32 machine screws,, 26 / 6-32 hex nuts, and 26 / #6 flat washers, made into homemade bindng postes. . ....
4 hours ago